Jake's RB Clio Rs 197
- Thread starter Jakkehoop
- Start date
Jakkehoop
Paid Member
So was watching some of Nathan drivers YouTube videos on fitting bits to his meglio (not sure if he is on here or not)
And all of a sudden my bank balance went down and got a order confirmation for k tec
(Well that is what I will be telling the wife lol)
Know it's the waiting game for it to arrive
What did I buy is the question
Sent from my iPhone using Tapatalk
And all of a sudden my bank balance went down and got a order confirmation for k tec
(Well that is what I will be telling the wife lol)
Know it's the waiting game for it to arrive
What did I buy is the question
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
Decided to get the clio on the ramp today and got the all the grills and wing vents pulled out as they will be going to the body shop to be painted satin black along with the new Renault badge
Also got my fog light air ducts from [mention]RSRowe [/mention]fitted they are a very nice fitting piece then it was on to the the head lamp washer blanks
Now it's a waiting game for the grills to be painted and my ktec racing package to turn up
Quick snap of her looking sorry for her self back on the drive way
Sent from my iPhone using Tapatalk
Also got my fog light air ducts from [mention]RSRowe [/mention]fitted they are a very nice fitting piece then it was on to the the head lamp washer blanks
Now it's a waiting game for the grills to be painted and my ktec racing package to turn up
Quick snap of her looking sorry for her self back on the drive way
Sent from my iPhone using Tapatalk
strell
Gold Member
What did you order then?So was watching some of Nathan drivers YouTube videos on fitting bits to his meglio (not sure if he is on here or not)
And all of a sudden my bank balance went down and got a order confirmation for k tec
(Well that is what I will be telling the wife lol)
Know it's the waiting game for it to arrive
What did I buy is the question
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
The good old ring door bell capturing the ktec delivery whilst I'm at work
The big box should give it away what it is
Will post pictures of the contents up tonight when I get home
Sent from my iPhone using Tapatalk
The big box should give it away what it is
Will post pictures of the contents up tonight when I get home
Sent from my iPhone using Tapatalk
suj
Paid Member
Helpimonfire
Paid Member
Judging by the packaging used by KTEC whenever I've ordered something, that's probably the bit of plastic trim you can get for your steering wheel 
Jakkehoop
Paid Member
Judging by the packaging used by KTEC whenever I've ordered something, that's probably the bit of plastic trim you can get for your steering wheel
It's a new set of valve caps
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
So what was in the package 
It's not the most exciting thing in the world but it will definitely make the car look a lot better and who don't like new car parts makes a change from the missus Amazon packages lol
So we have a brand new genuine Renault sport from lip for the 197
Will get some pictures of it posted up when I get a spare few minutes
Sent from my iPhone using Tapatalk
It's not the most exciting thing in the world but it will definitely make the car look a lot better and who don't like new car parts makes a change from the missus Amazon packages lol
So we have a brand new genuine Renault sport from lip for the 197
Will get some pictures of it posted up when I get a spare few minutes
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
So not really posted on here in a hot minute
Forgot to post about the spacers and stud and nut conversion that is all done now
(Discs and pads will be getting replaced soon for some Brembo hc discs and ebc blue stuff pads)
Pulled the 197 out of the garage the other day to give it a good clean because it had just been sitting in the drive way for a month or so and was filthy (as some of you know I don't currently drive the 197 as don't need it for work and use the missus daily if we go out anywhere and this was bought to be more of a fun/track car but it's nice to have to just to tinker with one day it will see the road)
Did manage to get a few bits done to it tho picked up a zero point one tow strap adapter and a red trs tow strap
After a bit of cutting and finessing it's all fitted
Even through on the trackday plate for the Picture
Now I have moved on to get out the snapped bumper to wing bolts out (previous owner snapped and never sorted)
Next on the list after reading/advice from [mention]burrellbloke [/mention] [mention]EthanMenace [/mention]thread is to do away with the washer bottle and fit a small bottle so I can run the ducting for the fog light ducts thanks lads for the link to the bottle
will update with that stuff soon
Sent from my iPhone using Tapatalk
Forgot to post about the spacers and stud and nut conversion that is all done now
(Discs and pads will be getting replaced soon for some Brembo hc discs and ebc blue stuff pads)
Pulled the 197 out of the garage the other day to give it a good clean because it had just been sitting in the drive way for a month or so and was filthy (as some of you know I don't currently drive the 197 as don't need it for work and use the missus daily if we go out anywhere and this was bought to be more of a fun/track car but it's nice to have to just to tinker with one day it will see the road)
Did manage to get a few bits done to it tho picked up a zero point one tow strap adapter and a red trs tow strap
After a bit of cutting and finessing it's all fitted
Even through on the trackday plate for the Picture
Now I have moved on to get out the snapped bumper to wing bolts out (previous owner snapped and never sorted)
Next on the list after reading/advice from [mention]burrellbloke [/mention] [mention]EthanMenace [/mention]thread is to do away with the washer bottle and fit a small bottle so I can run the ducting for the fog light ducts thanks lads for the link to the bottle
will update with that stuff soon
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
So the new washer bottle turned up from Amazon
Again big thanks to [mention]EthanMenace [/mention][mention]burrellbloke [/mention] for the tip on what bottle to use it fits like a glove
so set about getting the old set up out and before you knew it I had started on mounting the new one
All mounted and wired quick leak check and a few zip ties later and it was time to fill it up with screen wash
I did not fit the standard full neck as as the head light was hitting it so must of mounted my bottle slightly higher or lower then the other lads
Nice long flexible Funnel will do the trick for when it needed to be filled up for the time being
Definitely need to replace the washer jets with some fancy fan type jets
Now we have room to start on the brake cooling ducting just need to get the arch liners back in and work out the position to hole saw for the duct3d adapters
Sent from my iPhone using Tapatalk
Again big thanks to [mention]EthanMenace [/mention][mention]burrellbloke [/mention] for the tip on what bottle to use it fits like a glove
so set about getting the old set up out and before you knew it I had started on mounting the new one
All mounted and wired quick leak check and a few zip ties later and it was time to fill it up with screen wash
I did not fit the standard full neck as as the head light was hitting it so must of mounted my bottle slightly higher or lower then the other lads
Nice long flexible Funnel will do the trick for when it needed to be filled up for the time being
Definitely need to replace the washer jets with some fancy fan type jets
Now we have room to start on the brake cooling ducting just need to get the arch liners back in and work out the position to hole saw for the duct3d adapters
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
So see a post on the Facebook rs197/200 page about a lad who removed the vinyl bit on the door where it meets the rear quarter glass and I liked the look of it so I set about doing mine tonight
I had the idea of just heating it up and pulling it off in one bit wow was I wrong it took about a hour to do one door as it come off in tiny little flakes and left the crap glue behind
Some tar and glue remover made light work of getting that off then a quick hand Polish with some scratch remover and it don't look half bad I think a quick pass with a Machine polisher would make a proper job of it and make it look 100%
The other door can wait till another night lol
Sent from my iPhone using Tapatalk
I had the idea of just heating it up and pulling it off in one bit wow was I wrong it took about a hour to do one door as it come off in tiny little flakes and left the crap glue behind
Some tar and glue remover made light work of getting that off then a quick hand Polish with some scratch remover and it don't look half bad I think a quick pass with a Machine polisher would make a proper job of it and make it look 100%
The other door can wait till another night lol
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
Just a quick update (no pictures unfortunately until all the bits come back)
Sent a few boxes of bits over to max @ m.s custom engineering so as soon as they are back I will get some pictures posted of of what max has done
Sent from my iPhone using Tapatalk
Sent a few boxes of bits over to max @ m.s custom engineering so as soon as they are back I will get some pictures posted of of what max has done
Sent from my iPhone using Tapatalk
Helpimonfire
Paid Member
Satin black is a nightmare to keep clean and it shows every mark. Trust me, I have some satin black wheels
Jakkehoop
Paid Member
Satin black is a nightmare to keep clean and it shows every mark. Trust me, I have some satin black wheels
Oh really if they get that bad I will just have them painted in gloss black
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
Finally got around to doing the passage side pillar vinyl removal
treated the garage to a new heat gun (Amazon special) and is actually pretty decent for £15
the heat gun worked a treat have the vinyl off in about 15 minutes then just the sticky residue left to clean up and auto finesse tar and glue remover done it's magic again
will have to get some pictures now it's all off and the same black side strips are all fitted just need to re fit the door handle and mirror cap and that is that little task complete amd time to move on to the next lol
Sent from my iPhone using Tapatalk
treated the garage to a new heat gun (Amazon special) and is actually pretty decent for £15
the heat gun worked a treat have the vinyl off in about 15 minutes then just the sticky residue left to clean up and auto finesse tar and glue remover done it's magic again
will have to get some pictures now it's all off and the same black side strips are all fitted just need to re fit the door handle and mirror cap and that is that little task complete amd time to move on to the next lol
Sent from my iPhone using Tapatalk
Jakkehoop
Paid Member
Been a bit quiet on here as of late just been collecting parts as fingers crossed we should have some nice plans coming in to action in a few months 
Have been doing a few things found out that the water housing behind the alternator was leaking so a call to renault later we had a new housing/seal & pipe delivered also treated the clio to one of pms very good looking ac delete kits (shame no one sees it when it's all fitted)
So set about stripping all the ac component out and replacing the water housing and pipe at the same time
please excuse how dirty/dusty the 197 is she had been tucked up in the garage for nearly a year now poor thing but hopefully not for much longer
also fitted a coil pack stud and nut conversion kit
Also had a conversations with Alex @awmotorworks about some up and coming plans so will need to book them in with him in the next month or so so we can get cracking with everything else
Sent from my iPhone using Tapatalk
Have been doing a few things found out that the water housing behind the alternator was leaking so a call to renault later we had a new housing/seal & pipe delivered also treated the clio to one of pms very good looking ac delete kits (shame no one sees it when it's all fitted)
So set about stripping all the ac component out and replacing the water housing and pipe at the same time
please excuse how dirty/dusty the 197 is she had been tucked up in the garage for nearly a year now poor thing but hopefully not for much longer
also fitted a coil pack stud and nut conversion kit
Also had a conversations with Alex @awmotorworks about some up and coming plans so will need to book them in with him in the next month or so so we can get cracking with everything else
Sent from my iPhone using Tapatalk
Similar Thread Suggestions
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
| B | Clio alloy fitment | Clio 197 Area | 4 | |
| S | Clio 197 Cup Top Mount Spacers | Suspension, Brakes & Steering | 3 | |
|
New Engine Clio RS 200 near Bicester HELP NEEDED! | Clio General Chat | 1 | |
|
Clio 197 "RS3R" | Projects/Progress Threads | 7 | |
|
Jake's RB Clio 197 Track Car | Projects/Progress Threads | 76 |