Yellow

[Beany]

You’ll be ok with a 225 road tyre… it’s the chunky semis at 225 that get huge

 

[R20BTG]

Why should it have rake?

Because Adrian Newey

 

[jimmybell]

Garmin Catalyst ordered, lets see if this is any good.

i heard the catalyst mounts are a bit flakey so might try the SW motorsport bracket. Also need a method of mounting camera on the cage, looks like you can buy go-pro mount convertors (action cam mount part no 010-13214-00) but cant see it anywhere to buy in the UK

 

[burrellbloke]

@LiamP Has got a Catalyst.

 

[RSRowe]

You’ll be ok with a 225 road tyre… it’s the chunky semis at 225 that get huge

Mine 100% scrubbed on the rear with 225/45 PS4’s on

Because Adrian Newey

Cries in catering costs

 

[Marsch]

I'm running 25mm in the back at -30mm. I'm fine and there still is some room.

 

[LiamP]

Garmin Catalyst ordered, lets see if this is any good.

i heard the catalyst mounts are a bit flakey so might try the SW motorsport bracket. Also need a method of mounting camera on the cage, looks like you can buy go-pro mount convertors (action cam mount part no 010-13214-00) but cant see it anywhere to buy in the UK

Yeah don’t trust the magnetic mount by itself, I use the tegiwa bracket

Tegiwa Garmin Catalyst Tethered Mount Bracket Clip

When using recording or data logging equipment out on track, a requirement is that it must be tethered to your vehicle. Due to the standard Garmin Catalyst mount being magnetic, it won't comply with track rules, however, by mounting the device with this bracket, you will be able to use it...

www.tegiwaimports.com

I use ram mounts for my GoPro, not cheap but rock solid.

 

[DS197]

I'm running 25mm in the back at -30mm. I'm fine and there still is some room.

Is that with 215 tyres?

 

[Jakkehoop]

I think they’re a new product for sure.Check the Megane ones out: https://www.swmotorsports.uk/produc...-low-seat-base-mount-subframe-and-slider-kit/

I’m pretty certain they’ll fit the Clio too, as OEM seats are interchangeable.
I ended up with these as direct to floor ones made me seat land nowhere near Centre. That may be because my seat is rather large though.

Now thats a nice looking seat subframe set up [emoji1362]


Sent from my iPhone using Tapatalk

 

[Marsch]

Is that with 215 tyres?

Yes, but 215/40 R18 and the AD08R are a bit "meatier" than for example the Contis that were on there before.

 

[jimmybell]

decided i'm going to try subframe mounted eye bolts for the passenger seat, given the seat is on rails it will mean they don't need adjusting every time you adjust the seat position. in future the recaro subframe may get in the sea, so to speak, and some PMS direct to floor mounts will result in the same b23a/tunnel eye bolt as i have for driver side.

if anyone was wondering - the ebay psdesigns (for M3s) bracket wont fit the clio floor mount hole centres as i asked for the measurements (might fit higher up in the subframe but certainly not the floor, ymmv). fortunately i asked before buying them. in the end the 'drill a hole where i want it' approach is going to prevail and i'll save time/money/stress/effort.

garmin catalyst has arrived, bought a few random mounting options to play with - eventual goal is to have it visible but away from prying marshall eyes, and have it screwed down somewhere with a rigid clip+tether to prevent unwanted garmin-flying-in-my-face scenarios.

also bought a cage bracket for the go-pro. i need a newer go-pro (got mine free as a work gift back in 2014..) to get image stabilisation, but this will work for now.

got a first baby on the way mid july so need to cram in some trackdays before my life ends completely, and then have pre-approval for goodwood end of sept.

 

[burrellbloke]

Train the baby properly and they might end up doing all the work on your car.

 

[jimmybell]

Train the baby properly and they might end up doing all the work on your car.

got some experience of this?

this is my plan. hopefully i can substitute an expensive flush mount scissor lift in my new garage for simply a baby that can easily crawl under the car to do an oil change.

 

[R20BTG]

Train the baby properly and they might end up doing all the work on your car.

This made me chuckle more than it should have done, very dry Gav

 

[jimmybell]

Booked:

Goodwood 27th Sept
Brands April 20th

also looking at booking:

Snetterton May 25th
Donnington June 13th (may take GT3 here, tbc)

and another day may/june, baby due july so get them in whilst i can!!

 

[burrellbloke]

See you at Donington.

Take the GT3 so I can have a passenger ride!

 

[jimmybell]

See you at Donington.

Take the GT3 so I can have a passenger ride!

yet to track it - but keen to do so and you'd be very welcome, sadly i hear donny is now ridiculous with noise limits so i'll need to buy some silencer tips (because my titanium superlight JCR is ... on the loud side). and they cost more than a set of coilovers for a clio, so .. tbd!

 

[R20BTG]

GT3 is my bucket list car [emoji7]

 

[jimmybell]

GT3 is my bucket list car [emoji7]

Edit - i see now the plate has fallen off. oops, i guess.

 

[jimmybell]

Decent Sunday ticking off little jobs:

1. Sunstrip installed, fiddly but easier with wife’s help as she’s an expert at cut and stick. Also after thinking about it i forgot about the rain sensor.. so had to re-do one half to fix that looks professional now though. (Sainsburys carpark shot, sorry)



2. Garmin Catalyst installed - bolted to the clock dash binnacle surround thing as its a cheap part to replace if i decide to change it later. Put a tether/carabiner in the glovebox for it, with the tegiwa screw mount. Also had to do the sunstrip to determine where the front camera would sit! Now tucked behind the mirror.



3. Bought a makita dak dak… dunno why i didnt do this before, changing wheels is now 10x faster - so have…

4. installed and removed spacers again - to see how it looks/sits. Some very track experienced folks have suggested ‘never never ever’ to spacers on track so im probably not going to use them there, but we’ll see. After weighting and alignment there’s nearly 7cm diff between rear spring heights! Makes the driver rear look less cambery and sticks out a bit more. Net height diff is about 2cm.

5. Go pro now mounted to cage! Backup camera, will test how this works - sadly it’s ancient so really need a newer one with image stabilisation.


Brands on thurs, will be playing with susp stiffness. Messing with the gaz a little today and the ‘clicks’ arent as obvious as id have thought.