Trackspec Clio 197

[petercronin]

@trackspec197 got a question about those Rota SS10's for you if you don't mind - can you fit the Renault centre cap's in with the wheels fitted? It might just be those pictures above but it looks like there wouldn't be room because of the hub.

 

[trackspec197]

@trackspec197 got a question about those Rota SS10's for you if you don't mind - can you fit the Renault centre cap's in with the wheels fitted? It might just be those pictures above but it looks like there wouldn't be room because of the hub.

No the centre caps wouldn’t work with the Rotas mate

 

[petercronin]

No the centre caps wouldn’t work with the Rotas mate

Cheers, didn’t look like they would. Don’t mind when I’m on track but it would annoy me when the car is on the road - guess I’ll be saving up a bit for the Alleggerita’s [emoji853].

 

[trackspec197]

Cheers, didn’t look like they would. Don’t mind when I’m on track but it would annoy me when the car is on the road - guess I’ll be saving up a bit for the Alleggerita’s [emoji853].

The bore size wouldn’t work for the caps either. Very easy to 3D print a custom set.

 

[petercronin]

The bore size wouldn’t work for the caps either. Very easy to 3D print a custom set.

With the Alleggerita’s? They come with centre caps don’t they?

 

[trackspec197]

With the Alleggerita’s? They come with centre caps don’t they?

The Rotas come with centre caps but I chose not to use them. I meant it would be possible to make and print Renault diamond ones to fit the Rotas.

 

[petercronin]

The Rotas come with centre caps but I chose not to use them. I meant it would be possible to make and print Renault diamond ones to fit the Rotas.

I get you now, I’ll have to have a think then cheers.

 

[trackspec197]

Megane radiator has arrived so I can now run the larger Airtec intercooler.

 

[L33 KUP]

How did you get on with the megane rad?


Sent from my iPhone using Tapatalk

 

[trackspec197]

How did you get on with the megane rad?


Sent from my iPhone using Tapatalk

Haven’t got round to fitting it yet mate. Will be towards the end of next month now I’d imagine.

 

[trackspec197]

Sorted my alignment last night. Lots of curbs had knocked the near side out and started causing uneven tyre wear.

 

[lewishunter98]

Looks incredible on those wheels. Serious envy!

 

[Pav]

good job as always...

 

[trackspec197]

Thanks guys

 

[temeeo]

Looking great, how does the device for the wheel alignment work? Is it any good?

 

[trackspec197]

Thanks. It’s very good. I trust it more than most places who claim to offer “wheel alignment”. I bought it a few years back and corrected other people’s work with it. Very effective little tool which measures across both using mirror and laser to give you the reading. Purchased it from Demon Tweaks.

 

[temeeo]

Thanks. It’s very good. I trust it more than most places who claim to offer “wheel alignment”. I bought it a few years back and corrected other people’s work with it. Very effective little tool which measures across both using mirror and laser to give you the reading. Purchased it from Demon Tweaks.

Will look it up, thanks!

 

[trackspec197]

Ordered a new Airtec intercooler last week. Should make a big difference with the cooling.

 

[Mark_L]

Ordered a new Airtec intercooler last week. Should make a big difference with the cooling.

View attachment 132894

Did you go for the 95mm Matt?

 

[trackspec197]

Did you go for the 95mm Matt?

This one is designed for the Meglio Mark, not sure on diameter. Think it’s supposed to be good for 400bhp + based on what I’ve been told.