Nice effort Matt. Good looking graph
Have definitely taken note of the green pencil coil issue!!
Roll on Bedford
Have definitely taken note of the green pencil coil issue!!
Roll on Bedford
Trackspec Clio 197
- Thread starter trackspec197
- Start date
L33 KUP
Platinum Member
https://autospecialists.co.uk/AIRTE...-Meglio-Megane-Powered-Clio-Product-3171.html
Ordered from here as it was the only place I could find discount using the code airtecdeano
This is the link for Airtecs website using your company you may be able to get discount and set up a trade account with them
https://www.airtecmotorsport.com/pr...d-fan-kit-for-meglio-megane-powered-clio-197/
Sent from my iPhone using Tapatalk
adam thomas
Paid Member
nice figures ! . can I pick your brain and ask what coolant bottle you are using ?
adam thomas
Paid Member
Mark_L
Platinum Member
Matt's not running a top steady as he has vibratechnics mounts. So a 182 bottle might be a big tight if your running a steady.
adam thomas
Paid Member
AG_Cup
Paid Member
There are no spacers on the front but I’m running big camber. On the back it had 10mm axle shims already plus camber and toe. There is plenty of clearance though.
Quick video of the recent mapping day.
New coils and connectors fitted today.
New coils and connectors fitted today.
Pav
Moderator
Classic Renault engineering! Who the “F” decided that you need to remove the bumper to fit the tow eye??
Hopefully this is a useful reference for all of you who have been itching your heads thinking “where’s the tow point!?”
The plan is to take some reference measurements and drill the bumper to take a threaded bar and bow shackle. Much better than a strap and won’t damage the bumper if I ever need to tow it.
Hopefully this is a useful reference for all of you who have been itching your heads thinking “where’s the tow point!?”
The plan is to take some reference measurements and drill the bumper to take a threaded bar and bow shackle. Much better than a strap and won’t damage the bumper if I ever need to tow it.
Sounds like a good plan. If you want any help for measuring up a bar then just let me know as I run one of the early mk3 cup racer tow eyes on the rear.
Sent from my VKY-L09 using Tapatalk
That’s exactly my plan mate. Would you be able to provide me some measurements please?
Yes no problem. I will take it off and get them tomorrow evening.
Sent from my VKY-L09 using Tapatalk
It was a lucky find when I went to purchase my seat off a current Clio Cup team. I asked about the fabric type but was advised the early ones were much better as they don't melt from the exhaust heat. The front one doesn't fit my 200 very well but the rear is spot on and I've never seen another car with one.
Sent from my VKY-L09 using Tapatalk
Also the material ones are renowned for damaging the bumper and sometimes tearing. I’ll be making my own out of stainless steel. I may offer them once I’ve made a new pair.
I did a long lightweight bolt into the toe eye point with a fabric strap on it them coming out through the bumper.
