The Definitive What Wheels Thread...

[steve11]

A set of these will do just fine thanks...http://www.carbonrev.com/cr9/

 

[Numbnut]

Nobody any ideas?

Team Dynamics 1.2?

 

[smoggy mark]

Team Dynamics 1.2?

With white bits added

 

[Jesse James]

A set of these will do just fine thanks...http://www.carbonrev.com/cr9/

These wheels are pure porn

 

[McClioRS200]

No :d definatly not TD 1.2's that's not paint its a chrome section that's dug into the spokes. strange wheels haha

Only sticker I can see says

SIZE : 17X7.5
OFFSET : 42
CB : 73.1

 

[VolumeX]

Carbon wheels, gotta cost the bank for sure! Performance wise they look great for the track.

 

[pdd144c]

Anyone got any contact details to purchase some of the 17 x 8 cup racer wheels? Take it they will clear coilovers without spacers? Would arches need rolling at all?

Cheers

Paul.

 

[Chris]

Iirc r sports Wimbledon has sold them before.

They should be fine on coilies, don't need arches rolling no, they are only half an inch wider...

 

[pdd144c]

Nice one cheers!

 

[pdd144c]

Does anyone have the ET of the race car Speedlines, I've had a good search but no info seems available!

 

[aaronevans93]

Anyone got any ideas what color the orange car is on the 1st page, is the just a massively edited photo or?

 

[Jimmy]

Anyone got any ideas what color the orange car is on the 1st page, is the just a massively edited photo or?

Do you mean the second photo? If so, I think it's just LY, but looks a bit different because of the light.

 

[aaronevans93]

Do you mean the second photo? If so, I think it's just LY, but looks a bit different because of the light.

Yes mate that's the photo, I really like that orange with them wheels :drool:

 

[Chris]

Yeah it's liquid yellow. So many different shades it is depending on light.

 

[Azagedon]

Does anyone have the ET of the race car Speedlines, I've had a good search but no info seems available!

5.13.1. Only standard 7.5 J 17 inch rims with 68mm offset are permitted.
5.13.3. Magnesium replica wheels are prohibited.
5.13.1. Mandatory use of wheel: 7711 160 014 - 8J17

http://cliocupseries.co.uk/wp-conte...ACE-AND-ROAD-SERIES-TECHNICAL-REGULATIONS.pdf

 

[pdd144c]

Still no mention of it in any of the regulations!

 

[Azagedon]

Still no mention of it in any of the regulations!

Yes it does, as above ET is 68

 

[pdd144c]

That's not the 8" rim though, it's talking about the road car 7.5"!

 

[play1]

Has anyone been able to successfully fit an 17x8.0j or 18x8.0j wheel around et45 or less on a Cup without any scrub? Our range is so limited when looking for above et50! I've been looking at these following wheels:

http://www.koya.com.au/cars/sf05-18″-semi-forged-custom-fit/
http://www.koya.com.au/cars/cr-tek-1718big-brake-compatible/

Thanks in advance!

 

[Warren]

Has anyone been able to successfully fit an 17x8.0j or 18x8.0j wheel around et45 or less on a Cup without any scrub? Our range is so limited when looking for above et50! I've been looking at these following wheels:

http://www.koya.com.au/cars/sf05-18″-semi-forged-custom-fit/
http://www.koya.com.au/cars/cr-tek-1718big-brake-compatible/

Thanks in advance!

I've been using this to check
http://www.willtheyfit.com/

Standard alloys are 215/45/17 7.5W ET68
At 7.5J which is what I'm looking at you can get away with ET45. People run 25MM spacers on lowering springs without any scrubbing which makes the standard wheels poke to ET43, but it all comes down to the other sizes. The site I linked is great for checking it out quickly.




EDIT: Question guys, Is there any reason why these wouldn't fit? 23MM Poke over standard, serious soft spot for them after looking at TSW Nurburgrings which unfortunately don't come in 17".

https://www.tyreleader.co.uk/alloy-...campaign=alu&gclid=CPOtiLnL18oCFWgOwwodEpoBDA