thanks for the help, appreciated
can i run those speakers off the standard head unit or not?
Last edited:
Steve's rs200 progress thread
- Thread starter Jonesy07
- Start date
thanks for the help, appreciated
can i run those speakers off the standard head unit or not?
I didn't ? just bent two lugs back and they screw straight in.
Be aware thought, Rears are not much better than standard IMO.
The rears were a massive upgrade for me.
Maybe it's your dodgy wiring
Ha Ha maybe ! ;/
Are you interested in these wheels as i will go out and brave the rain and get some photos up ? If not i will out them up in the for sale section over the weekend.
Speedlines are in for powder coating so should be on Monday morning.
Here they are, sorry a little dirty.
Just had a good check over and 3 are perfect and one has a small curb mark that has only effected the paint and not the alloy.
Last one showing the marks :
Centre caps included :001_rolleyes:
Just had a good check over and 3 are perfect and one has a small curb mark that has only effected the paint and not the alloy.
Last one showing the marks :
Centre caps included :001_rolleyes:
Mate, if i can trust your word then they are yours.
Will clean and box them up for you.
Bit of a update :
Wheels are off and ready for you mate....
New powder coated wheels on and freshly sprayed diffuser and front bumper,sorry for the rubbish pictures. Will get some proper ones of the whole car at the weekend once all the work is finished.
Spacers have now turned up,l so all booked in on friday to have these and the springs fitted... :thumbup1:
Bit of a update :
Spacers have now turned up,l so all booked in on friday to have these and the springs fitted... :thumbup1:
Have you got the link, price and size of those bud?
Ps-car looks epic :jase2:
Link mate :
Paid £90 per set and they are 20mm.( i got a bit of a deal as i bought springs from them as well) You then need to add bolts. Mine are 50mm which i think were £2.50 each plus locking wheels nuts at £40 ish. All in not cheap IMO.
Spacers were out of stock and i waited 10 days for delivery from Germany.
http://www.performancealloys.com/alloy-search-results.aspx?ModelID=6754&PCDID=14&tab=3
I looked at this but IMO the 25mm is too much. I wanted 20mm rear and 16mm front but the only bolts i could get for the 16mm needed to be cut and i didn't want to get involved in it.
I am worried 20mm will be too much for the front and i will go back down the 16mm route. If so i will be able to sell you a set !
Last edited:
I looked at this but IMO the 25mm is too much. I wanted 20mm rear and 16mm front but the only bolts i could get for the 16mm needed to be cut and i didn't want to get involved in it.
I am worried 20mm will be too much for the front and i will go back down the 16mm route. If so i will be able to sell you a set !
larkspeed sell 41mm bolts that work perfectly with 16mm spacers mate as both myself and BenW run them,when fully tightened they stick through the rear of the hub by a thread or 2 so perfect...
i wouldn't advise running different size spacers front and rear bud,if you put smaller spacers on the front compared to the rear you'll get some pretty good understeer from what i've read and heard.
I looked at this but IMO the 25mm is too much. I wanted 20mm rear and 16mm front but the only bolts i could get for the 16mm needed to be cut and i didn't want to get involved in it.
I am worried 20mm will be too much for the front and i will go back down the 16mm route. If so i will be able to sell you a set !
I may take you up on that pal... 20 or 25 was my choice - Jase (founder) ran 25s and it looked brilliant!
Where in chi are you?:hug:
Similar Thread Suggestions
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
RS200 engine lights coming on, advice needed | Clio 200 Area | 4 | |
|
|
New RS200 owner | New Members | 2 | |
|
looking for clio mk3 rs200 ecu | Clio 200 Area | 0 | |
| F | KW Variant 3 RS200 Coilovers | Car Parts For Sale | 1 | |
| S | Clio rs200 airbag light | Interior and Audio | 9 |