Rear exhaust hanger brackets

[WheelerDave]

Does anyone know where we can get new rear exhaust hanger brackets - the ones that fix to the boot floor and then hold the exhaust rubber?

Renault don’t make them anymore.

The part numbers are
8200486488
8200486487

Thanks for any help with this

 

[turkie172]

There is a pair for sale on ebay
Exhaust Bracket link

 

[WheelerDave]

Thanks, but this link does not work?

 

[turkie172]

Where are you UK ireland ?

 

[WheelerDave]

Uk

 

[turkie172]

Well I clicked on it and it works, but what I have found my account is registered with a Northern Ireland address and if I search eBay for stuff anyone that does not post to Northern Ireland their listings do not show up in the search and I have to search in a InPrivate browser window so no account is traced back to me I get to see the full list maybe thats the problem you are in an area people don't want to post to just check that out.

 

[Sean197]

Pardon our interruption...

 

[WheelerDave]

Thanks but I don’t think these are the right part.

Here is a photo of what we need

View attachment 1731606548265.jpeg

 

[Sean197]

Thanks but I don’t think these are the right part.

Here is a photo of what we need

View attachment 158745

These?

https://www.kamracing.co.uk/renault-oe-exhaust-mounts-renault-clio-mk3-rs197-rs200.html

 

[WheelerDave]

Thanks. Thats the middle bracket and rubber hangers for the rear. What I need are the metal brackets those rubber hangers fix onto on car. The brackets are bolted to the boot floor of the car

 

[turkie172]

That is the 197 brackets the part that bolts through the chassis that mounts the bracket through a square rib under the chassis (middle of the picture) is the bit thats not looking right to you the single spikes pointing left and right are the bracket itself.

 

[WheelerDave]

I see. It’s the bit in the smaller circle I’m after

 

[turkie172]

What car and what exhaust are you running that bracket is bolted to the diffuser bracket mounts at the top as it bolts to the under floor studs are you using a single exit exhaust?

 

[WheelerDave]

It’s a 2009 Clio RS 200 Cup. They are the standard OEM brackets I think/ hope?

I’ve ordered the ones off eBay above so will see if they do the trick

It is a non standard exhaust, single exit, but I think attached to the standard hangers.

Will let you know how I get on…..