cup spoiler fitting kit

[ipodsandguns]

I dont think Renault will sell you a fitting kit as it doesnt have a part number. Its part of the spoiler.

You need some 15mmx5mm M6 bolts they'r about 35p each from B&Q I got some last night.

Also some spring washers.

 

[Keiran197]

Renault only mate! Help your self, go to either to Wrexham

http://www.stoneacre.co.uk/contact-us-wrexham.asp

G.Blackhurst in Whitchurch

http://maps.google.com/maps?f=q&hl=...8,-2662146,154366260150775589&li=lmd&z=14&t=m

Twigogeeko said they only come with the spoiler

 

[Keiran197]

if some one has the contents list of the kit it would be much appriciated

 

[ipodsandguns]

The key part is the bolt iv already listed, just make your own guides.

 

[Keiran197]

ok thanks mate,but would like a list if possible

 

[Keiran197]

well its ariived.now for the paint

 

[ryan197]

with the m6 alan pins you also need collar/spacers, otherwise you will sqwash the frame of the boot.

 

[Keiran197]

where can i get these ryan?thats why i could do with a list and get the exact parts needed,not one for bodging

 

[ryan197]

its a piece of small tube that goes round the M6 pin, inside the bigger hole on the inside of the boot, should be the same thickness as the frame (outer skin to inner frame) maybe able to get some from B&Q or small length of small tube and cut to size. them small though, the inner diameter of the tube should be snug the the M6 thread.

 

[Keiran197]

oh my god,i can see this being a right mission.ive got a peice of silicon type material with the spoiler,do you know what thats for

 

[ryan197]

any pics? cant say off me head. hes a step by step.

1 mark holes for drilling for the M6 alan pins and washer fixings (get from B&Q)
2 drill hole big enough for the m6 pin all the way through.
3 drill the hole on the inside bigger so the spacer can fit in.
4 bolt up.
5 the bit of the mount that over hangs the back, drill from inside of the boot with a small drill and screw in a self tamper screw.

 

[Keiran197]

just hope i get all the right screws etc

 

[Keiran197]

i only need to knoe the bolts i need which i assume is 4.apart from that the spoiler is whole