Helpimonfire
Paid Member
Beanys RB 200 cup
- Thread starter Beany
- Start date
burrellbloke
Paid Member
I haven’t have a chance to watch any footage yet. I will post it when I find it for everyone’s entertainment.
burrellbloke
Paid Member
Beany
Platinum Member
The official photos are never ones to write home about from MSV however local photographer Paul Hart is usually on hand and luckily was about on the day.
Motion ratio media
Beany
Platinum Member
PITA
Paid Member
Word of warning, the 4 outside holes aren’t always equidistant so don’t flip it over and measure!
Beany
Platinum Member
So I’ve been after one for awhile and finally I managed to spot one for a decent price on good ole eBay and couldn’t resist letting it slip thru the net.
after plenty of nervous poo’s I found the guide and set out masking the area up. After jamming a screw into the aerial with some trust string to the front badge I had my centre line.
marked out the holes to be cut and they all seemed to line up, then came the cutting.
cutting the hole had me filled with anxiety but somehow a higher power must’ve had faith as it turned out pretty good.
sadly 1 out of the 4 screw holes doesn’t line up 100% I could wiggle it with the drill to enlarge but I don’t want to risk it. It’s covered and not like it’ll cause an issue.
It didn’t come with any bolts and I pre bought some however they’re a tad long.
need to get a touch up paint on the bare metal and some shorter bolts.
after plenty of nervous poo’s I found the guide and set out masking the area up. After jamming a screw into the aerial with some trust string to the front badge I had my centre line.
marked out the holes to be cut and they all seemed to line up, then came the cutting.
cutting the hole had me filled with anxiety but somehow a higher power must’ve had faith as it turned out pretty good.
sadly 1 out of the 4 screw holes doesn’t line up 100% I could wiggle it with the drill to enlarge but I don’t want to risk it. It’s covered and not like it’ll cause an issue.
It didn’t come with any bolts and I pre bought some however they’re a tad long.
need to get a touch up paint on the bare metal and some shorter bolts.
Beany
Platinum Member
Lack of an update due to having food poisoning:/
however I managed to get the scoop fitted on Saturday with some rare northern sun
car needs a good clean as it’s got dusty from the work being in the garage.
it’s bonded with sticks like shit and 3 screws so shouldn’t be going anywhere
however I managed to get the scoop fitted on Saturday with some rare northern sun
car needs a good clean as it’s got dusty from the work being in the garage.
it’s bonded with sticks like shit and 3 screws so shouldn’t be going anywhere
burrellbloke
Paid Member
Beany
Platinum Member
No major update, it’s been afew trackdays since the oil was last changed so 5litres of fresh Millers NT+ and new oil filter done on the car today. Oil that came out looked fairly decent.
Taken the bumper off too for fog light removal
Taken the bumper off too for fog light removal
Helpimonfire
Paid Member
I got this photo followed by "Gunna set this on fire".
Standard Renault shenanigans.
Beany
Platinum Member
Beany
Platinum Member
Post snetterton update!
No secret now that myself @Helpimonfire @jimmybell @burrellbloke & @EthanMenace went on a magical mystery tour to Snetterton.
Again the car was trailered down so literally dragged it off the trailer checked the wheel bolts were torqued up and ready to rock and roll!
Was 4yrs since the last trip to snetterton and the car is a different breed since then! Was refreshing to have a change of scenery.
Car performed really well all day considering it had some abuse by the local Clio thief Wes (he now has his own)
Was plenty to improve upon, car had plenty to give. Watching back footage shows areas I could do better at, but it’s all process of getting seat time and gaining confidence back!
Struggling to download some of the go pro footage however managed to get the one sorted of @jimmybell spin and a fast lap from the thief himself..
No secret now that myself @Helpimonfire @jimmybell @burrellbloke & @EthanMenace went on a magical mystery tour to Snetterton.
Again the car was trailered down so literally dragged it off the trailer checked the wheel bolts were torqued up and ready to rock and roll!
Was 4yrs since the last trip to snetterton and the car is a different breed since then! Was refreshing to have a change of scenery.
Car performed really well all day considering it had some abuse by the local Clio thief Wes (he now has his own)
Was plenty to improve upon, car had plenty to give. Watching back footage shows areas I could do better at, but it’s all process of getting seat time and gaining confidence back!
Struggling to download some of the go pro footage however managed to get the one sorted of @jimmybell spin and a fast lap from the thief himself..
Not out the scene just the car!Was also nice to meet a familiar face in @Big Ben with his new motor.
Shame he’s out the Clio scene but after a passenger blast I can see why he’s made the choice… stunning more Refined car than a 17yr old shitbox
Don’t worry I’ll park it well away from the cool kids in their Renault Sports
Beany
Platinum Member
I need to update this as there’s afew small bits going off in the back ground …
However in the meantime… sneak peak
However in the meantime… sneak peak
burrellbloke
Paid Member
Similar Thread Suggestions
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
| K | Engines 197/200 | Clio 200 Area | 3 | |
| D | Clio rs 200 Gordini | New Members | 0 | |
| D | Gordini RS200 stripes close up pics/vids? | Clio 200 Area | 0 | |
| F | Rear ABS sensor , difference between 200t trophy and non trophy ? | Suspension, Brakes & Steering | 0 | |
| K | Lambda sensors for late model Clio 200 | Engine, Gearbox, Exhaust and Air Intake | 0 |