Beanys RB 200 cup

[Beany]

Small update...

Was going to de-wiper the Clio but left the kit in my dads truck

Rather than sit around I fetched the car home and gave her a good clean whilst there was a break in the weather, alas some pics

 

[lewishunter98]

Looking good [emoji41]

Sent from my ONEPLUS A5010 using Tapatalk

 

[sevenfourate]

3rd level Detailing badge achieved

Looking good !

***Got a puller for the wiper arm from motor spindle ? You'll likely need one.........

 

[Beany]

3rd level Detailing badge achieved

Looking good !

***Got a puller for the wiper arm from motor spindle ? You'll likely need one.........

Yeah, just need the kit lol

 

[jamesgw200]

3rd level Detailing badge achieved

Looking good !

***Got a puller for the wiper arm from motor spindle ? You'll likely need one.........

or use a grinder like me

 

[sevenfourate]

or use a grinder like me

Engineer Vs Plumber right there !

***No re-match on piping up a bathroom needed mind. We’ll just call it 1 point each

 

[jamesgw200]

Engineer Vs Plumber right there !

***No re-match on piping up a bathroom needed mind. We’ll just call it 1 point each

was a massive pain in the arse and i had nothing but a black cloud and a cute little angle grinder winking at me..

thankgod for iron out because i nearly had a prolapse watching all the dust settle

 

[Benno]

When’s the cage going in the back?

 

[sevenfourate]

was a massive pain in the arse and i had nothing but a black cloud and a cute little angle grinder winking at me..

thankgod for iron out because i nearly had a prolapse watching all the dust settle

Ouch. Hate that shit....

I removed my wiper arm from the spindle to refit a new one. To be fair I had to make my own puller at work and it was still hair raising working within 1” of glass and paintwork.....

Feel your anguish !

 

[Beany]

Brief update:

Nothing much is happening till Cadwell in August and cars quite happy in the garage, few things to fiddle with at weekend but otherwise sound.

Managed to get some part worn AR-1 tyres fairly cheap so swapped them onto the Team Dynamics and will place the AD08r’s for sale soon.

 

[Big Ben]

Bet it rains at Cadwell!

 

[Beany]

Had a few hours free this morning so decided that track is the only way forward so started stripping the rear, got the passenger side done and with afew niggles along the way however primed in knowledge when it comes to the drivers side.

Was hoping to remove the rear wiper & motor however upon removing the plastic boot casing I’m not sure how to remove it. Any advise is welcome.

Afew pics of what I managed to take. Excuse the mess lol

 

[lewishunter98]

Best update so far [emoji6][emoji6][emoji6] When you say plastic casing what do you mean? For the dewiper

Sent from my ONEPLUS A5010 using Tapatalk

 

[Johnny 99]

Had a few hours free this morning so decided that track is the only way forward so started stripping the rear, got the passenger side done and with afew niggles along the way however primed in knowledge when it comes to the drivers side.

Was hoping to remove the rear wiper & motor however upon removing the plastic boot casing I’m not sure how to remove it. Any advise is welcome.

Afew pics of what I managed to take. Excuse the mess lol
View attachment 135217 View attachment 135218

Things are getting serious!

 

[petercronin]

From what I’ve heard the wiper motor is riveted on to a bracket. People tend to just cut it off.

 

[Beany]

From what I’ve heard the wiper motor is riveted on to a bracket. People tend to just cut it off.

That’s what I’ve heard.. I’ll attempt to dril out the rivets later on

 

[suj]

Easiest thing is to buy a carbon fibre rear boot mate.....

 

[Beany]

Easiest thing is to buy a carbon fibre rear boot mate.....

Haha yeah that’s the easiest but not the cheapest
Carbon fibre roof scoop tho

 

[Pav]

haha..guess the missus finally caved then??

 

[Beany]

haha..guess the missus finally caved then??

She doesn’t know