AC condenser replace
- Thread starter TrackM3
- Start date
Piece of cake. You don't even need to take the front bumper off completely, just undo the bolts holding the bumper on at the inner arches, and the bolts holding the bumper to the slam panel, then pull the bumper down. From memory you have to unbolt the horn to get more room to wiggle the condenser out of the car. Few bolts to remove the condenser itself, few 10mm bolts to undo the aircon pipes, and it'll come out.
Yeah, I'm assuming the OP knew that!
Although, just to be on the safe side make sure there's no gas in it before removal!
Gassed up and works a treat!
Tips on what? Changing the condeser
Tips on what? Changing the condeser
It's a doddle. Never worked on the front end of this car before and start to finish took me less than an hour.
AC rad is right at the front, bumper off, crash bar off, 2 bits of plastic trim then the condenser can come out.
http://www.carparts4less.co.uk/cp4l...ae6533928a46fd22372cbaec8b3ebd396cc169&000382
10% off with code: JULY10
10% off with code: JULY10
Similar Thread Suggestions
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
| M | Clio 3 Gear Shift Knob Replacement Compatibility & Installation Help | Interior and Audio | 1 | |
| R | 200 air con condenser | Engine, Gearbox, Exhaust and Air Intake | 5 | |
| J | Air con condenser | Clio 197 Area | 4 | |
|
New aircon condenser | Engine, Gearbox, Exhaust and Air Intake | 9 | |
|
A/C condenser woes... | Interior and Audio | 5 |