Pav's Albi Blue 197T

[Big Ben]

Liking it Pav... Looking forward to seeing what you're dipping!!

 

[sevenfourate]

some diy hydro-dipping will take place here soon..fingers crossed..got a 2x1m sheet from ebay and an activator..should be trying some small bits this weekend..
View attachment 16348 View attachment 16349

Now THAT is extremely cool.

We needs a write-up on this one Pav. No thinking about it we need pics. Like loads of pics.

Screw-that. Actually we need video:



"Come Carbon with Pav" - available in all good stores

 

[Big Ben]

Now THAT is extremely cool.

We needs a write-up on this one Pav. No thinking about it we need pics. Like loads of pics.

Screw-that. Actually we need video:



"Come Carbon with Pav" - available in all good stores

"Come Carbon with Pav" Sounds like a futuristic porno..

 

[Chris]

Wow awesome idea Pav... Let us know how you get on - might be something other consider in the future - inc myself

 

[Pav]

will see how I get on with some small parts first..if it goes ok then I can try some more sophisticated shapes and sizes
pictures will follow
haha was in stitches after some of these posts

 

[Pav]

Wow awesome idea Pav... Let us know how you get on - might be something other consider in the future - inc myself

i was looking to have some of my parts hydro-dipped by a company but the prices put me off..the 2x1m sheet cost me £13 and activator £9..should be able to get a few bits done..check this Chris

 

[Chris]

Just googled myself mate and been watching this:

 

[Pav]

yeah seen that..same principle basically..not too difficult from what i've seen..worth a try,isnt it?
what are you planning on doing Chris??

 

[Chris]

Well I was considering wrapping/plastidipping some small parts around the car, also want the rear diffuser but thats probably a bit big to hydrodip...

 

[Gordini]

some diy hydro-dipping will take place here soon..fingers crossed..got a 2x1m sheet from ebay and an activator..should be trying some small bits this weekend..
View attachment 16348 View attachment 16349

Good on you mate for giving this a go. Can't wait to see the results. What are you using for a tank and how are you heating the water?

 

[sevenfourate]

Well I was considering wrapping/plastidipping some small parts around the car, also want the rear diffuser but thats probably a bit big to hydrodip...

Only too big if your tank is too small....

 

[Gordini]

Only too big if your tank is too small....

Just have to cut the diffuser in two...

 

[Pav]

Good on you mate for giving this a go. Can't wait to see the results. What are you using for a tank and how are you heating the water?

i wont do big parts..will borrow a big box from work..have lots of them lying around..lego and stuff..the water should be an ambient temperature from what i've seen so not a big deal..

 

[Pav]

Well I was considering wrapping/plastidipping some small parts around the car, also want the rear diffuser but thats probably a bit big to hydrodip...

what design/pattern are you going for Chris??guess not carbon

 

[Chris]

Only too big if your tank is too small....

Well a rear diffuser wouldn't fit in my bath lol...

 

[///M]

R26R clutch kit..single mass flywheel,slave cylinder+bolts
timing belt kit,water pump,aux belt kit

Not sure how I missed this parts porn but I did. Like a kid on Christmas day mate eh?



Hats off to you for doing some home hydrodipping. Good luck.

Be honest, have you thought about dipping your Mrs in it? I totally know I would if Mrs M would let me

 

[Pav]

Thanks M.. the car should be undergoing the meg surgery very soon..fingers crossed..
there's no Mrs.Pav im afraid

 

[///M]

Thanks M.. the car should be undergoing the meg surgery very soon..fingers crossed..
there's no Mrs.Pav im afraid

 

[Jesse James]

Next big craze right there

Sent from my SM-G935F using Tapatalk

 

[Sean197]

I'm sensing a dipped engine cover