Ultra racing

[ken182]

I was looking for one and couldn't find one either

I contacted Ktech ages ago and they said they didn't make one but possibly would in the future with enough interest.

 

[Tree200]

To be honest the front struts are so close to the bulkhead which is pretty stiff, not sure how much it will help.

 

[madlynx]

@madlynx tbh i don't think anyone does a strut bar for the newer 200's, Ktec maybe

Unfortunately they don't do it them yet. Thanks anyway!)

 

[Chris_200CUP]

That's it. I think that the engineers at UR had good reason for it.

And it is very practical too. You lose very little space in the booth.

how does the right hand set bolt? Does it use a self taping screw or summit? As can't get in too bolt it like the other side

 

[Chris_200CUP]

I'm on about the boot brace , it hasn't linked the picture

 

[ryan t]

how does the right hand set bolt? Does it use a self taping screw or summit? As can't get in too bolt it like the other side

It requires a nut and bolt, and it's a right pain in the arse I had to pull the side carpet out from behind the seat and you can just get to the bracket that it bolts on to. You can hardly get a finger in behind it let alone a nut. But it is possible and you'll probably swear a lot

 

[Chris_200CUP]

Sounds fun then!

other sides a doddle as can get too that

 

[pu11y]

That's sides a ball ache for sure.

 

[Chris_200CUP]

Anyone fitted the bottom front strut brace?

 

[Raptor6767]

It requires a nut and bolt, and it's a right pain in the arse I had to pull the side carpet out from behind the seat and you can just get to the bracket that it bolts on to. You can hardly get a finger in behind it let alone a nut. But it is possible and you'll probably swear a lot

LOL. True.

 

[krash67]

Me thinks I'm going to make my own front and back,have loads of tube and a MIG welder. just need a kind person to provide a dimensional drawing for the rear.

 

[treid]

Hi there, what do you think - wrong picture or new version with smaller top mounts ?
http://www.ultraracingshop.com/ultr...197200-front-strut-brace-tw2990_p23053889.htm