Ultra racing boot brace

[Chris_200CUP]

Who's got one fitted ?

If your looking at it from the boot, how do fix the right hand side too fixing ? How do get the nut into the bolt or does bolt just screw into one the holes.

Thanks

 

[Rs200matt]

 

[Rs200matt]

Mine came with a pack of bolts and it bolts into the existing holes

 

[Chris_200CUP]

So just bolts in on the high bits aswell? There's no nuts

 

[Rs200matt]

There's a bolt and a nut, it's abit fiddly but it's easy enough

 

[Hyde200]

The brace should come with a little packet containing: 2x Bolts (different sizes) iirc, 2x Nuts to suit, and some washers ??? Bolting it to the right hand side is a pain and very fiddly :thumb1:

 

[Treza360]

Of the tower brace, rear sway bar and boot brace. It was by far the biggest pain to fit. It's fit is so tight and trying to slide the nut in behind is also painful. Got it done myself but there was much cursing.

 

[Chris_200CUP]

Well ordered one, sounds like could be in for few hours
of fun.

weather it will do anything we'll have see

 

[Jesse James]

can i get one of these in with the rear bench in place?

 

[Chris]

can i get one of these in with the rear bench in place?

yes it will still fit with that in place

 

[Reecej88]

The brace should come with a little packet containing: 2x Bolts (different sizes) iirc, 2x Nuts to suit, and some washers ??? Bolting it to the right hand side is a pain and very fiddly :thumb1:

Sorry to revive i reasonably only post. Can someone explain to me how it bolts to the 4 points with only two bolts and two nuts? Ive just got mine and am equally as confused!

 

[PAUL JA]

The two bolts that hold it to the floor are existing.

We drilled the side mount holes in the bodywork to 11mm and used 10mm bolts not the 8mm that came with the kit.