Sold the Meglio Cup Car... Now project 205...

[krash67]

well done son...good performance. rev limiter tested all ok.

 

[A1axx]

What do you all think? I was having reflection problems with the metal panel in front of my cut away dash.. so I made this:



Tapped a thread onto the gearstick and fitted a new gearknob




Sent from my iPhone using Tapatalk

 

[Sean197]

Looks good. Carbon?

 

[A1axx]

Looks good. Carbon?

Yea mate.. carbon/aluminium honeycomb. Some offcuts I had in the garage!


Sent from my iPhone using Tapatalk

 

[tcw]

Which gauge is that you're using? I may have missed it in the thread. I am looking to get one to monitor oil temps and such.

 

[A1axx]

Which gauge is that you're using? I may have missed it in the thread. I am looking to get one to monitor oil temps and such.

It's a depo 4in1 mate! Awesome wee gauge, oil pressure, oil temp, water temp and voltage. Recommend getting the unsmoked version


Sent from my iPhone using Tapatalk

 

[tcw]

It's a depo 4in1 mate! Awesome wee gauge, oil pressure, oil temp, water temp and voltage. Recommend getting the unsmoked version


Sent from my iPhone using Tapatalk

Nice one cheers, any suggestions on where best to source a genuine one in the UK?

 

[A1axx]

Nice one cheers, any suggestions on where best to source a genuine one in the UK?

They are from China mate


Sent from my iPhone using Tapatalk

 

[krash67]

Why didn't you not flock the dash?


Sent from my iPhone using Tapatalk

 

[Hyde200]

Or just fit a racer dash!

 

[A1axx]

Why didn't you not flock the dash?


Sent from my iPhone using Tapatalk

I would have but it wasn't actually the dash causing the problem, you may have seen before it was chopped back, the metallic grey part under the windscreen was reflecting up onto the window.

Or just fit a racer dash!

Haha, it doesn't fit a RHD with standard clocks!

 

[A1axx]

I was going to put a dibond sheet up there, but carbon is much nicer i think!

 

[A1axx]

Few extra bits done inside and lowered the front




Sent from my iPhone using Tapatalk

 

[A1axx]

Doing its thing at donny yesterday!



Few small updates from before





Track rods remade and solid mounted front of the subframe


Sent from my iPhone using Tapatalk

 

[sevenfourate]

Epic times you put up yesterday too buddy ! VERY impressive.

Stance looks great now with the front down a bit more. Was this done before yesterday ? Car all good at Donny.....or have you now highlighted the next 'weak' spot ?

 

[A1axx]

Epic times you put up yesterday too buddy ! VERY impressive.

Stance looks great now with the front down a bit more. Was this done before yesterday ? Car all good at Donny.....or have you now highlighted the next 'weak' spot ?

Literally tweaked it all for donny, and run higher than usual pressures in the rear.. just need some Michelin slicks and I think a good clean underneath again


Sent from my iPhone using Tapatalk

 

[Daverb]

Liking that subframe arm

 

[A1axx]

Liking that subframe arm

Yea dude. Proper solid mounted now


Sent from my iPhone using Tapatalk

 

[trackspec197]

Looks good mate

 

[///M]

Car looked and sounded really great yesterday. Seemed very composed on track.