My New Intake Setup (video added)

[200 Gordini]

Well after seeing the Ktec prototype filter setup i thought, sod paying top dollar for that ill do it myself! and ill tell you what, what a difference, car feels like it pulls harder and the noise is just bliss! hope you like! total cost £90! pipercross filter fitted with a samco 60 degree bend hose! just waiting on a piece of alloy piping from a friend to go between cone and hose.






http://www.youtube.com/watch?v=6LPswR3PqvY

 

[Chris_200CUP]

Looks good! Got a video of what sounds like?

Shame so tight as if could get extra cold feed to it would help more

 

[litchy]

Well after seeing the Ktec prototype filter setup i thought, sod paying top dollar for that ill do it myself! and ill tell you what, what a difference, car feels like it pulls harder and the noise is just bliss! hope you like! total cost £90! pipercross filter fitted with a samco 60 degree bend hose! just waiting on a piece of alloy piping from a friend to go between cone and hose.

Nice. Try the 63mm TB along side and you wont be disappointed....

 

[Jburgess455]

Any chance of making a short vid? Be interesting to hear

 

[200 Gordini]

Looks good! Got a video of what sounds like?

Shame so tight as if could get extra cold feed to it would help more

havent got a vid yet but ill get one up over the weekend for yous. its not that tight at all tbh, ive still got the feed from the front bumper, plus after fitting i went for a decent run and at the end checked everything was ok, to my surprise the area around the filter wasnt hot (until i was sat idle for a wile,which will happen regerdless) and the filter was cold to touch so i cant see heat being a problem.

 

[Mason]

Nice. Try the 63mm TB along side and you wont be disappointed....

Good plan! Hoping to get a 64 along with my soon to be custom setup maxogen (like smoggy mark's & Henderson's) thanks to Mark. You think it will make that much of a difference?!

That setup looks ace! Saves some pennies on ktec's also haven't got to worry on a smaller battery.

 

[Fernandez]

Looking good Mike.. Vids would be great.

I really should put pics of my V6 instal, a bit of tweaking and I managed to fit the new,battery and the airbox in the engine bay.

 

[litchy]

Good plan! Hoping to get a 64 along with my soon to be custom setup maxogen (like smoggy mark's & Henderson's) thanks to Mark. You think it will make that much of a difference?!

That setup looks ace! Saves some pennies on ktec's also haven't got to worry on a smaller battery.

63 mm was better for me and Willis.

 

[Mason]

63 mm was better for me and Willis.

Trial and error I guess

 

[litchy]

Good plan! Hoping to get a 64 along with my soon to be custom setup maxogen (like smoggy mark's & Henderson's) thanks to Mark. You think it will make that much of a difference?!

That setup looks ace! Saves some pennies on ktec's also haven't got to worry on a smaller battery.

Trial and error I guess

I originally had a 64mm too, so yep def trial n' error....

 

[200 Gordini]

Nice. Try the 63mm TB along side and you wont be disappointed....

Good plan! Hoping to get a 64 along with my soon to be custom setup maxogen (like smoggy mark's & Henderson's) thanks to Mark. You think it will make that much of a difference?!

That setup looks ace! Saves some pennies on ktec's also haven't got to worry on a smaller battery.

yes mate you will notice the difference more or less staight away, i was impressed!

 

[200 Gordini]

Looking good Mike.. Vids would be great.

I really should put pics of my V6 instal, a bit of tweaking and I managed to fit the new,battery and the airbox in the engine bay.

thank you sir! yea ill def get one up soon! yeah you should, you managed to fit the battery in there too??? :w00t:

 

[Fernandez]

thank you sir! yea ill def get one up soon! yeah you should, you managed to fit the battery in there too??? :w00t:

In a nutshell, the small battery (litchys old one) is at the front, I undid the airbox into its 2 parts, rotated the lid 180°, laid the airbox on its side and made a custom pipe.. Bobs your uncle, fannys your aunt and I got a V6 airbox without wiring a battery into the boot. :thumbsup:

 

[930Tech]

Bobs your uncle, fannys your aunt

You can tell you've been near chesterfield for a while

 

[Fernandez]

You can tell you've been near chesterfield for a while

Tell me about it mate, people think I'm weired because I married out of the family

 

[smoggy mark]

Well after seeing the Ktec prototype filter setup i thought, sod paying top dollar for that ill do it myself! and ill tell you what, what a difference, car feels like it pulls harder and the noise is just bliss! hope you like! total cost £90! pipercross filter fitted with a samco 60 degree bend hose! just waiting on a piece of alloy piping from a friend to go between cone and hose.

Bet it sounds good!might be worth trying some sort of heat shield,the manifold will get hot after lot of booting it.

In a nutshell, the small battery (litchys old one) is at the front, I undid the airbox into its 2 parts, rotated the lid 180°, laid the airbox on its side and made a custom pipe.. Bobs your uncle, fannys your aunt and I got a V6 airbox without wiring a battery into the boot. :thumbsup:

Top work mate must of been fiddly job.

 

[200 Gordini]

Yeah I'll get something fabricated when the nites start to stretch out abit.

 

[toop182]

I won't be long with the piping mike, my set up isn't far away! Pics to follow!

 

[inwardnoise]

In a nutshell, the small battery (litchys old one) is at the front, I undid the airbox into its 2 parts, rotated the lid 180°, laid the airbox on its side and made a custom pipe.. Bobs your uncle, fannys your aunt and I got a V6 airbox without wiring a battery into the boot. :thumbsup:

What battery you using angel? I'm more than interested I've been after installing a v6 air box for a while but the battery relocation has always out me off.

 

[mdking]

What battery you using angel? I'm more than interested I've been after installing a v6 air box for a while but the battery relocation has always out me off.

+1