Latest activity
-
The Clio has continued its form, now with an upgraded driver it scored a pole and 2 wins at Donington! I actually really enjoyed... -
This car may be for sale soon. If anyone is interested in discussing seriously, please drop me a PM.
-
FFodey replied to the thread Crunching TL4.........*NOW WITH POSSIBLE BETTER SYNCHRO RINGS!!.Cool - thank you
-
RSRowe replied to the thread Crunching TL4.........*NOW WITH POSSIBLE BETTER SYNCHRO RINGS!!.You'll know. They do get progressively worse, to the point where they refuse to change gear quickly. All depends on use and how you... -
FFodey replied to the thread Crunching TL4.........*NOW WITH POSSIBLE BETTER SYNCHRO RINGS!!.Lads just curious, how crunchy is the crunch? When do you know, I’m assuming mine isn’t as I’m not sure. But I will be rebuilding in the...
-
SSean.R replied to the thread CL10 CYA project.Going to try this first Drop the exhaust, get it cut and weld some flanges on Then back for a retest
-
Bought a spare lower and upper intake to get ported/polished and powder coated,the gasket is pretty much the same size as the intake... -
The original radiator support was getting rusty again and wanted to shed some weight with an ali box section so got one to modify...
-
Got the dash out to lighten it a bit and do some work,removed the passenger airbag and with the help of some speed holes got it down to...
-
EthanMenace reacted to VeiRoNv2's post in the thread Front hub upper swivel joint removel with
Like.
Get a refund and change mechanic,I used one of these press tool,just take your time be careful and use a bit of heat if you have... -
Hhwa0725 replied to the thread Front hub upper swivel joint removel.Thanks VeiRoNv2, I will try to get him to do it the way you have shown. From the look of where mine breaks, I think he wasn't supporting...
-
HSome of them can be a right pain. You always run the risk of doing the same again. You can buy them separately. But are very expensive
-
HGet a refund and change mechanic,I used one of these press tool,just take your time be careful and use a bit of heat if you have...
-
Some of them can be a right pain. You always run the risk of doing the same again. You can buy them separately. But are very expensive -
Get a refund and change mechanic,I used one of these press tool,just take your time be careful and use a bit of heat if you have...