decided to just order the pins, thought it was worth it for £40, its one less thing to worry about that way.
replacing brembo pins
- Thread starter Chris197F1
- Start date
Did you order 1 set or two?
As the original Brembo pins come in a pack of two, so enough for 1 caliper.
As the original Brembo pins come in a pack of two, so enough for 1 caliper.
I changed my pads today. My car has done 9000 miles in 17 months and 3 out of the 4 pins came out with no issue. The 4th a little more stubborn but came out eventually.
Today I've had front discs and pads all round fitted by Rentech.
3 of the 4 pins came out with ease, the 4th needed drilling and a little heat to get it shifted. One of the pads in the calliper with the sticking pin was also seized solid in the calliper.
Car has covered 26k and I think this is the first time they've ever been removed.
Seems as though it's a lottery, you might get lucky, you might not!
Got pins in there from mrpink now so won't happen again
3 of the 4 pins came out with ease, the 4th needed drilling and a little heat to get it shifted. One of the pads in the calliper with the sticking pin was also seized solid in the calliper.
Car has covered 26k and I think this is the first time they've ever been removed.
Seems as though it's a lottery, you might get lucky, you might not!
Got pins in there from mrpink now so won't happen again
Similar Thread Suggestions
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
Replacing shocks all round tomorrow any tips? | Clio 200 Area | 12 | |
|
Replacing inner CV boot | Clio 200 Area | 8 | |
| A | engine light after replacing fuel pump | Clio 197 Area | 8 | |
| J | Replacing Headlights | Body Work and Exterior Lights | 5 | |
|
replacing seals on front brembo calipers. | Suspension, Brakes & Steering | 3 |