My Albi Blue 200

Update :
Yesterday I Fitted a scorpion Non Res decat exhaust system to the car. Has made all the difference! Love the sound it makes, apart from the drone at 70 is going to take some getting used to..
 
Been a while since I’ve posted an update tho this so here goes with all the new things :smile:
Both Front ARB Links have been replaced
Both Outer tie rod ends have been replaced
Both drop links have been replaced
Exhaust rattle has been sorted out
RS badge has been retrofitted to my early 200 which doesn’t normally come with the badge.
Rebuilt my front brakes and resprayed them in Yellow, and about to move on and do my Rear calipers this weekend to match the front :smile: attached is a picture of the freshly painted calipers. Would anyone be interested if I made one, or is their a guide already on how to properly respray the calipers and make them look factory new? :smile:
 

Attachments

  • 63B58A8F-F242-4878-A593-E043E331A24D.jpeg
    63B58A8F-F242-4878-A593-E043E331A24D.jpeg
    143 KB · Views: 15
  • Like
Reactions: ///M
Good work Harry. Not sure if there is a guide for a caliper refurb, couldn't hurt at all.
 
Another small thing I made for the car whilst at work today, didn’t like the sticker on the inside of the fuel cap, so just made a new one up. I like it a lot better than the old one :smile:
 

Attachments

  • 95E5CCBE-A65E-46B7-8AC3-DDF739F55396.jpeg
    95E5CCBE-A65E-46B7-8AC3-DDF739F55396.jpeg
    1.2 MB · Views: 17
  • F1BED873-49F6-4DBE-B964-13C47A87ED20.jpeg
    F1BED873-49F6-4DBE-B964-13C47A87ED20.jpeg
    1.3 MB · Views: 18
  • Like
Reactions: ///M

Similar Thread Suggestions