in italy there is already people that fit this..
supersprint make this Y-pipe for delete the pre-cat while them don't produce the pipe for remove the cat!!
@Simo
I notice on the Y-piece it says Grade 304 Stainless Steel.
Just be aware that grade of stainless hardens at it gets hot and cools down, so it might be prone to cracking.
Another thing to consider is that the Manifold is Mild steel and if you have welded Stainless to Mild Steel, it will cause corrosion at the connection
It might have been better to do this in Mild steel and have a bolted connection to the Stainless Steel exhaust
@Simo
I notice on the Y-piece it says Grade 304 Stainless Steel.
Just be aware that grade of stainless hardens at it gets hot and cools down, so it might be prone to cracking.
Another thing to consider is that the Manifold is Mild steel and if you have welded Stainless to Mild Steel, it will cause corrosion at the connection
It might have been better to do this in Mild steel and have a bolted connection to the Stainless Steel exhaust
hi carlo! Everything is possible..
but i know that SS make exhaust and exhaust components in very high quality.. and they test all their components befor sell us! http://www.supersprint.com/
so i trust in their components and in their technical
So we can try it and after many mounth i'll make check of the piece and post some photo of the condition!