Fitting spacers

[Yellow Clio]

I've been running the K-Tec 19mm spacers for 3-years now without any problems. certainly never noticed any detrimental effects to handling and they do fill the arches much better than without.
Just watch your wheels as they're VERY easy to curb with the spacers on...

 

[Cassie]

I've been running the K-Tec 19mm spacers for 3-years now without any problems. certainly never noticed any detrimental effects to handling and they do fill the arches much better than without.
Just watch your wheels as they're VERY easy to curb with the spacers on...

Thank you, i fitted mine yesterday. Front sits perfect, literally jus touched the inner arch on full lock but nothing that is gonna cause me drama. I could have gone more on the back to get it how I want it but didn't want to run staggered.

 

[Roshi69]

I'm running 20 mm and lowered, no issues at all, tbh I seen a std 200 the other day and pointed it out to the wife and the first thing se said was, is that the same as yours, looks completely different! Out of every mod the lowering and spacers is the only ones it do if I only have the choice of picking two!

Where did you order yous springs and spacer (and what ones did you go for mate). As I know your from NI too and it's annoying for shipping with some companies. Every day I see mine now it tortures me until I get it sorted!

 

[Cossers]

Where did you order yous springs and spacer (and what ones did you go for mate). As I know your from NI too and it's annoying for shipping with some companies. Every day I see mine now it tortures me until I get it sorted!

I didn't put them in mate, the previous owner did it all, I know the springs are h and r, the spacers are 20mm hubcentric, the type with the extended steel bolts which I prefer tbh, your more than welcome to come up and see it and go foe a run so you can see what they are like

 

[Roshi69]

I didn't put them in mate, the previous owner did it all, I know the springs are h and r, the spacers are 20mm hubcentric, the type with the extended steel bolts which I prefer tbh, your more than welcome to come up and see it and go foe a run so you can see what they are like

Yes mate sounds good! I'll have the give the car a good clean. Last time you seen me passing it was stinking and I don't like that haha

 

[Cossers]

Yes mate sounds good! I'll have the give the car a good clean. Last time you seen me passing it was stinking and I don't like that haha

Lol, me too, freak me out a fellow owner seeing mine dirty! Pm me and I'll give you my num, I'm just outside Portadown

 

[Jmax]

Where did you order yous springs and spacer (and what ones did you go for mate). As I know your from NI too and it's annoying for shipping with some companies. Every day I see mine now it tortures me until I get it sorted!

Here's where I got the springs from...

http://www.ebay.co.uk/itm/H-R-Lower...197-200-Cup-/121421458122?hash=item1c45486aca

the spacers...

I got them from another member on the forum, but should be available through eBay.

lock bolts...

http://www.ebay.co.uk/itm/TPI-Black...023517?hash=item4622785a5d:g:~XEAAOSwE0JY~02r

wheel bolts (you'll need two sets of these)

http://www.ebay.co.uk/itm/10-x-M14-...136744&hash=item2a689daaba:g:JmsAAOSwhilZX190

 

[Cossers]

Here's where I got the springs from...

http://www.ebay.co.uk/itm/H-R-Lower...197-200-Cup-/121421458122?hash=item1c45486aca

the spacers...

I got them from another member on the forum, but should be available through eBay.

lock bolts...

http://www.ebay.co.uk/itm/TPI-Black...023517?hash=item4622785a5d:g:~XEAAOSwE0JY~02r

wheel bolts (you'll need two sets of these)

http://www.ebay.co.uk/itm/10-x-M14-...136744&hash=item2a689daaba:g:JmsAAOSwhilZX190

Cheers for that bud

 

[Jmax]

Cheers for that bud

I'm dead on like that