Hey guys. So it's been just over a year since I parted ways with my clio 200 in order to buy one of my dreams cars. A Honda s2000.
Just thought I'd share a few photos and progress since I've had the car for those interested
One of my old clio
image by Tim Long, on Flickr
And then this is how I picked up the S.
Compete bog standard and a prefect starting point to make my own personal touches to.
image by Tim Long, on Flickr
image by Tim Long, on Flickr
How it sat up to about 4 weeks ago
image by Tim Long, on Flickr
image by Tim Long, on Flickr
image by Tim Long, on Flickr
And then I lowered it some more and removed hardtop for the better weather [emoji1]
image by Tim Long, on Flickr
image by Tim Long, on Flickr
image by Tim Long, on Flickr
image by Tim Long, on Flickr
image by Tim Long, on Flickr
Current spec is:
Exterior / Aero
Rockstar Garage full carbon fibre hardtop (Mugen rep)
OEM front lip
Backyard Special duckbill / APR GTC-200 wing
APR front splitter
Veilside strakes
Professionally rolled fenders, slight flare of around 10mm, rear bumper cut and tab relocated
Debadged and smoothed front, rear and sides
Interior
Custom carbon kevlar pole positions
Buddyclub low position seat rails
Seatbelt extenders
Skunk2 weighted shift knob
CR radio door
Engine / Drivetrain
K&N fipk intake
Toda torque-kun header
Skunk2 Megapower exhaust
Berk 70mm decat
Hondata Flashpro
Suspension / Chassis / Brakes
MeisterR Zeta R coilovers
Megan Racing driveshaft spacers
Hardrace rear toe control arms
Hardrace steering rack spacers
Energy Suspension full polybush kit
Cusco ALC OS front strut bar
Geo bolts replaced
Geo spec:
Front camber -2
Front toe (total) 0
Caster 6
Rear camber -3.4
Rear toe (total) 0.4
Wheels and Tyres
Enkei RPF1 17x9 +45 (square)
Hankook Ventus Evo v12 245/40/17 (square)
Muteki sr35 lug nuts
Accessories / misc
Spoon rocker cover
Cusco slam panel
Polished cross beam member cover
Mugen oil cap
Password JDM anodised engine bay bolts
Password JDM radiator stays
Spoon reservoir covers
Electronics
Pioneer Headunit
Thanks for looking.
Just thought I'd share a few photos and progress since I've had the car for those interested
One of my old clio
image by Tim Long, on Flickr
And then this is how I picked up the S.
Compete bog standard and a prefect starting point to make my own personal touches to.
image by Tim Long, on Flickr
image by Tim Long, on Flickr
How it sat up to about 4 weeks ago
image by Tim Long, on Flickr
image by Tim Long, on Flickr
image by Tim Long, on Flickr
And then I lowered it some more and removed hardtop for the better weather [emoji1]
image by Tim Long, on Flickr
image by Tim Long, on Flickr
image by Tim Long, on Flickr
image by Tim Long, on Flickr
image by Tim Long, on Flickr
Current spec is:
Exterior / Aero
Rockstar Garage full carbon fibre hardtop (Mugen rep)
OEM front lip
Backyard Special duckbill / APR GTC-200 wing
APR front splitter
Veilside strakes
Professionally rolled fenders, slight flare of around 10mm, rear bumper cut and tab relocated
Debadged and smoothed front, rear and sides
Interior
Custom carbon kevlar pole positions
Buddyclub low position seat rails
Seatbelt extenders
Skunk2 weighted shift knob
CR radio door
Engine / Drivetrain
K&N fipk intake
Toda torque-kun header
Skunk2 Megapower exhaust
Berk 70mm decat
Hondata Flashpro
Suspension / Chassis / Brakes
MeisterR Zeta R coilovers
Megan Racing driveshaft spacers
Hardrace rear toe control arms
Hardrace steering rack spacers
Energy Suspension full polybush kit
Cusco ALC OS front strut bar
Geo bolts replaced
Geo spec:
Front camber -2
Front toe (total) 0
Caster 6
Rear camber -3.4
Rear toe (total) 0.4
Wheels and Tyres
Enkei RPF1 17x9 +45 (square)
Hankook Ventus Evo v12 245/40/17 (square)
Muteki sr35 lug nuts
Accessories / misc
Spoon rocker cover
Cusco slam panel
Polished cross beam member cover
Mugen oil cap
Password JDM anodised engine bay bolts
Password JDM radiator stays
Spoon reservoir covers
Electronics
Pioneer Headunit
Thanks for looking.