Clio 200 FF with Cup Pack
- Thread starter Hyde200
- Start date
Hyde200
Gold Member
So I got round to getting my calipers rebuilt as I was getting what felt like warped discs, turned out there was two pistons that had seized causing them to stick!
I'm out on track at Castle Combe on the 22nd and with that in mind I wanted to make sure brakes were all good. With the freshen up of the calipers we flushed the system and put some Mutal RBF600 fluid in. I've also got some Mintex M1144 front pads on there way which will go in ready for the track day.
I'm out on track at Castle Combe on the 22nd and with that in mind I wanted to make sure brakes were all good. With the freshen up of the calipers we flushed the system and put some Mutal RBF600 fluid in. I've also got some Mintex M1144 front pads on there way which will go in ready for the track day.
Hyde200
Gold Member
We're due an update here as a few things have changed. I now have some fixed bucket seats, Harnesses and Steering wheel/boss kit/quick release. Steering wheel is being fitted tomorrow. However, seats and harnesses have been in for a while now.
I have kept the standard belts in for the moment although I plan on striping the car so i can get a cage and a scoop on it and some point!
Sparco Rev ll Fibreglass seats (side mounts came with the seats) and Sparco/Oreca sub frames from Ktec. I had to drill new holes so i could get the positioning right for me.
Seats when i took delivery
M20 x 200mm long rod, 2 washers and 2 nuts. Oh and the tow strap got me this...
On the car..
Couldn't wait to get the harnesses out of the box of course!
And finally the steering wheel.
Been looking at putting some livery on so some more changes will happen shortly i guess! I've currently got a pile of stickers and wondering whether i should bite the bullet to get sticking or not! lol
(Something like this)
I have kept the standard belts in for the moment although I plan on striping the car so i can get a cage and a scoop on it and some point!
Sparco Rev ll Fibreglass seats (side mounts came with the seats) and Sparco/Oreca sub frames from Ktec. I had to drill new holes so i could get the positioning right for me.
Seats when i took delivery
M20 x 200mm long rod, 2 washers and 2 nuts. Oh and the tow strap got me this...
On the car..
Couldn't wait to get the harnesses out of the box of course!
And finally the steering wheel.
Been looking at putting some livery on so some more changes will happen shortly i guess! I've currently got a pile of stickers and wondering whether i should bite the bullet to get sticking or not! lol
(Something like this)
