Search results

I need to cut the dash (cup/pov spec) to clear the cage and wondered what people had used to trim it. I've got a spare 'padded' dash to practice/mock up on but I wasn't sure if it was a case of attacking it with a jigsaw or it's possible to get a neat finish with a hole saw or something...

Sorry should have been clearer, I meant remote reservoirs for the dampers

I’m just wondering where people with remote reservoirs are mounting them on the front. Space is pretty tight and I might be able to get them on the underside of the scuttle but with the V6 airbox this is going to be tight. I think they’ll go on the front panel but worried a little about impact...

Sorry I should have explained it a little better. It was more the ones on there are pretty much trashed rather than any possible weight saving. I thought it may be easier to use a universal product rather than trying to source replacements. I was thinking of exhaust wrap then possibly further...

I’m replacing the shift cables and handbrake cables as part of an underbody refresh. As the heatshields are a bit scabby I’m thinking of leaving them off as it’ll mainly be a track car anyway. Has anyone done this? I’m thinking it’s wise to get done heat wrap for the cables just wondering what...

No stock unfortunately, emailed for eta and no answer Tried to order from eBay and order refunded with no message so guessing no stock there either

Not sure if anyone can help as I’ve been trying to buy the spacers for the ‘full fat’ steering column and no one seems to have stock. I’m more than happy and capable of machining a set but does anyone have the measurements if they’re critical for steering angle etc… From what I can read up those...

Quick question as rebuilding rear my calipers soon as one is a little sticky. Does anyone know if the cylindrical mechanism that fits inside the calipers are available to buy separately and from where? BigRedd seem to do pistons seal etc… but can’t see anything else listed.Thinking of changing...

Hi, I'm looking to do the popular battery relocation and have looked at a lot of threads. It seems a lot of people move the relay and fuse holders that were on the battery tray. But I'm looking at other options. There are 2 micro relays in the power feed fuse board (777) which are listed as...

Hi, I'm looking to do the popular battery relocation and have looked at a lot of threads. It seems a lot of people move the relay and fuse holders that were on the battery tray. But I'm looking at other options. There are 2 micro relays in the power feed fuse board (777) which are listed as...

Would anyone have the wiring diagram for the sidelights on a 200? I think it could be a stalk issue but wondered if anyone could shed some light(no pun intended) on what pin of the uch should receive what signal when the sidelights are on with the stalk rotated. Just looking to try and rule...

I’m guessing the answer is going to be hi and get it plugged in and diagnosed but I’ve just had the electrical fault pop up. The loom has been trimmed back but it’s been fine for weeks. If you disconnect the power by the glovebox and leave it you get the esp deactivated message which if you...

Thanks I’ll get a set made up

I’m slowly working my way through your thread. Can I ask how you got on with these, if all good do you have the ability to make more of these? I’m sure a local shop could make them with an own top mount as reference but thought I’d ask

Thanks for the info. I’m going to have a look and see what can be coded out and if I don’t need or want it and it can be coded out chances are in time it’ll go. First stage will be a slight tidy up of the rear loom and stereo and heater removal. I’ll likely remove the keyless entry sensors too...

Could well be ‍♂️ I thought they were maybe the crash sensors. I’m not bothered by the keyless entry as long as the key card works it’s fine

Cool, the main reason is not to have unnecessary plugs from items removed such as radio, heater etc… but if there are other bits that could go while I’m there without issue I’d take them out too. Thanks again

Thanks for the info, would you leave the crash detectors or can these go. I think there are three aren’t there. One on the rear iso fix bar then one by the handbrake and one by the keycard. Had a look in a mates when he had the trim out to try and plan ahead

Thanks for the heads up. I plan to lose the airbags and crash detectors at some point but will speak to a specialist as I hope with Clip and their removal this won’t be an issue. Power steering will remain as will the instrument panel Going to bin off the radio too as it’s already a noisy...

Thanks for the reply, that was my thought. As you say I was going to work back from whatever was being removed. I was a little conscious of removing components that may interrupt any canbus signal. Would you know of any don’t removes as such or as long as you leave the pins for the items you...