Search results

  1. shakey_hand_man

    shakey's 400hp Cup

    https://www.youtube.com/watch?v=HNnf2P7ru68 Previous setup and new, the 271bhp setup is slightly behind but you get the idea.
  2. shakey_hand_man

    Fuel Swirl Pots

    Btw I run a swirl pot, and 044 all inside the cabin, but I run Teflon lines (these are required under msa regulations for any fuel within the cabin)
  3. shakey_hand_man

    Fuel Swirl Pots

    The intank pumps in the clios effectively have a built in volume that acts as a swirl pot circa half litre thereabouts
  4. shakey_hand_man

    shakey's 400hp Cup

    Recently been getting a burnt oil smell when the car was hot.. After a mission to untighten the oil drain -found out the gasket had been burnt away!! Mmm toasty
  5. shakey_hand_man

    Rs200t dump valve fitting - help!!!!

    It needs fitting between turbo and throttle body, the nearer the throttle the better
  6. shakey_hand_man

    shakey's 400hp Cup

    Chi -done
  7. shakey_hand_man

    Help on getting meg 225 parts

    The ecu in mine was from a 225, but whether the Megane I took it from had ever had a newer ecu fitted I'm not sure.. Andy
  8. shakey_hand_man

    Help on getting meg 225 parts

    Ryan197cup let me know if you need an engine
  9. shakey_hand_man

    shakey's 400hp Cup

    Runs standard sagem, boost varies from 0,7 to 1,3bar dependant on what gear your in
  10. shakey_hand_man

    shakey's 400hp Cup

    Chi just want to get everything on it tidy for now
  11. shakey_hand_man

    shakey's 400hp Cup

    It runs boost per gear so you can just mash the throttle in all gears and it's fine (when dry)
  12. shakey_hand_man

    shakey's 400hp Cup

    Short vid, phone doesn't really pickup the sound very well: https://www.youtube.com/watch?v=z9Cbbg_hLxA
  13. shakey_hand_man

    shakey's 400hp Cup

    Car was on the rollers again today, this time at JKM in Portsmouth. Pleased first time the car made over 400bhp :) -Andy
  14. shakey_hand_man

    225 engine

    If done properly shouldn't de-value, if anything would expect it to hold value better -if well executed...
  15. shakey_hand_man

    oil usage

    The f4r engine tends to burn a bit of oil, especially at higher rpm
  16. shakey_hand_man

    wiring loom

    That would be mega cost, what's the symptoms??
  17. shakey_hand_man

    Possible Clutch Issue

    Sounds like a synchro issue
  18. shakey_hand_man

    Luke_197 Progress thread

    looks nice :)
  19. shakey_hand_man

    Possible shakey sighting

    Yarp was me mate
  20. shakey_hand_man

    RR Printout Thread

    But how many hours work has gone into the map in advance?
Top Bottom