Search results

asfaik if there's voltage it doesn't necessarily mean it will work,you would need to put a load on the feed as said to test the circuit,it might be okay with voltage when there is no load on it but no voltage when you put a draw on it if that makes sense

Yes of course,I used this one 36mm. https://ebay.us/m/rvyvNn

300£ for two track rod is a violation,quite sure even the original parts are around 50 each. https://frogjammotorsport.co.uk/products/renault-track-rod-kit-renault-clio-197-200-mk3-rs-7701475837

Quite poor quality, have you contacted Pure Motorsport at all?

probably H&R lowering springs

Any fault codes?

Best to use a spacer to turn off the engine light,if it stays on all the time you wont notice if it develops another fault.

Fantastic work and the paint doesn't look half bad for what it's been trough considering it's red,mine is flaking off in more places every other day. Wanted to ask,how do you take the roof rails out,do they just slide out? thanks.

Yes unfortunately

Yes.

The flywheel is from Pure Motorsport,this is the weight:

I have the lightened flywheel and helix 4 paddle sprung clutch and it certainly makes the gear changes faster and more responsive,it's on or off so when in traffic you need to be mindful of this but woudln't go back and when pushing it's great imo.

Welcome,that looks great!

https://www.ebay.co.uk/itm/267236051787?_trkparms=amclksrc%3DITM%26aid%3D777008%26algo%3DPERSONAL.TOPIC%26ao%3D1%26asc%3D20250417133020%26meid%3D7246802ba4e84221a0851f920f138179%26pid%3D102726%26rk%3D1%26rkt%3D1%26itm%3D267236051787%26pmt%3D0%26noa%3D1%26pg%3D4375194%26algv%3DRecentlyViewedItemsV...

They should be lol, they're from carbonskins from eBay/Facebook

I thought it was to tell you the bonnet was open lol

Also made the two diffuser brackets out of aluminium,944 grams saved lol. Got new brake discs on the back with RC6 pads,they dont have any springs so rattle and make a nice noise lol. Fitted carbon door badges as well.

Few things to update,converted all the instrument cluster and other lights to white leds. All the switches are quite easy to do as they have just a simple bulb to solder,before: White led: Rest are out of my skill range so got CrazyLeds to do them,very quick turn around too,before...

What fault codes are you getting?

I found a good way to refill the gearbox oil is gravity feed trough the reverse/neutral switch with the car on the ground,leave the level plug open and slowly fill it until it comes out of the level plug,I think this way you can get a more accurate refill.