Search results

THIS with the Torque Lite App should do it. I used this many times before getting the RSTuner from fastchip.nl and worked a charm. Cheap and effective solution for reading and clearing faults :)

Looks spot on mate... How hard was it to fit the AC Delete kit?

Thanks @Maidens1979 - I've sent the seller a question on which is the correct OMP kit but if they can't answer I'll probably go down that route. I assume these will cater for all types of wheels - I've ordered an OMP wheel.

I'm no expert but... Who's mapping it?

Plenty to run through - i'd get it plugged into a proper diag as you're running wild without checking the actual error code(s) stored in your ECU. If you're near Bristol, I have an RS Tuner that can read and diagnose issues and don't mind helping.... Did you use correct & genuine plugs? Are...

Thanks mate. I've gone for a 350mm but may go down to 330mm if i find it's too big. I'm sure 350mm will be fine though! Appreciate the response too!

Get it plugged in and scanned again and check for any new error codes if you haven't already!

Hi @av4625 - Bringing up an old thread, I don't suppose you remember the part number of the OMP boss/hub kit you ordered? I know you mentioned OD/1960RE787A (states it's for 06-08 models) but did you send this back and get OD/1960RE117A (states it's for 08-12 models)? I too have a 56 plate...

Sorry - also - what size aftermarket wheels do you guys have? I see 330mm or 350mm... I understand it's probably personal preference but I'm not sure what size the standard wheel is (I'll measure later today)... I assume 350mm is ideal size but good to know what others have swapped in and how...

Hi all, Can anybody help with aftermarket steering wheel hub/boss kits? I am after an OMP kit but am getting conflicting part numbers... OD/1960RE117A shows only fits years 08-12 - Link HERE OD/1960RE787A shows it's for Clio 197 F1 models, years 06-08 - Link HERE I have a standard 2006/2007...

Bleeding brakes is a fine art but the RSTuner from fastchip.nl works a treat... Although tbf, I've had just as good results using this; https://www.ebay.co.uk/itm/391904422897 Fits the Clios and makes bleeding all corners a breeze :)

https://fastchip.nl/shop/clio/clio-3-products/rstuner-kit-detail I have one of these - ability to read everything from ECU, ABS, EPS etc... Plus added benefit to get a custom remap/calibration to suit your vehicle/mods. Yes it's costly, but if you're spending a few pennies on a decent unit, you...

Well played sir, good work!

Sounds like symptoms of a blown flexi perhaps... Louder, sluggish, wrong air/fuel mix due to bad readings on your exhaust sensors because the flexi's have probably popped. Check your manifold flexi's. If it's particularly loud around that area, I'd start there!

I'm in Bristol. I may take you up on that offer if I'm passing through, though.. thank you!

Evening chap - I'm having a similar issue, fitted harnesses and removed factory seatbelts and getting the front pretensioner airbag light on. RSTuner software shows the circuit is open and when i plug the belts back in to the harness, the fault is cleared... Did you managed to resolve this and...

Uhh... I couldn't tell you but I did them as tight as I felt like they were when they came off.... If that makes sense?

I have the k-brace too. Can't tell you if it made any improvements but it doesn't cause any issues... @Maidens1979 - mine doesn't clunk so perhaps you might wanna investigate haha....

RHD and i could grab some pics but tbf, its plastic trim... somebody who needs or wants it will know exactly what they are getting. I'll grab some pics when i get a moment.

Your money, your call mate. Would be a bummer if you splash out on new lights and it didnt resolve the issue