Search results

Late to the party But if your looking for tire storage ideas I made one from unistrut

ok, I did get a spare UPC from a running 197 It never solved my issue - however I did not check the part number

Turkie172 - do you know if the UPC is coded to the car? the auto spark did not think it was thanks

next steps drain 3/4 tank of fuel thats 4 years old oil filter and oil flush fresh fuel and try to get her started for 30 seconds compression test then pull the engine for timing belt and lick of paint parts needed I would like to somehow find a new 225 engine loom - if anyone has any ideas

I can't seem to post the video But that's the imob light out and the car is cranking Party time and onto the good stuff now

**Update:**In case anyone comes across this in the future: I called an auto electrician, and he identified the fault in less than two hours. The ECU was not receiving power from the UPC. He connected a wire to the side of a relay in the UPC and supplied 12 volts to it. This cleared the...

2nd test Voltage on pin 6 & 14 with the ingition on

So these are the results 1st test across pins 6 & 14 for resistance

thank you for taking the time to help and stick all the drawings and links up really helpful I will test the pins next and report back, previously I have been testing with the ignition on appreciate the help mate thanks

Hi, thanks for posting mate really needed something like that to point in the right direction Now I need to find some one with a CLiP in central Scotland thanks again

I am on a key with it been a CUP car

I had renault clip connected on friday - it was unable to read / see the ECU spent saturday tracing wires and testing I have 12v coming out of the UPC and going to the ECU also the cambus plug it giving me the 2.9v on the pins and then to the ECU I proved continuity from the UPC back to the...

Hi all Has anyone have a photo of the UPC (engine bay fuse and relay box) from a CUP model 200 Want to make sure mine has the correct fuses and relays fitted. Cheers

Hi mate Did you get to the bottom of this?

does anyone know the part number for the UPC - protection and switching controller (engine bay fuse box) cheers

thanks - just downloaded it and having a read ready for next week

oh that sounds great fun I have a week off next week so hopefully get some time on this issue

The obd is reading, used the icarsoft CR Main fault is the DF282 - injection multiplexed information missing