Recent content by mattb03

Eventually got round to looking at my wipers again, as suggested stripped, cleaned and re-greased the wiper mechanism. I also stripped the motor and cleaned the contacts inside as they were looking quite tarnished. Mechanism is moving freeley now but the wipers are still struggling and...

Had some time today to investigate my wiper issues, I removed the motor and tested it on the bench, other than a bit dirty it was fine, both speeds and the park detect line goes to GND when in position. I refitted and tested it again, it will work fine then just suddenly stop, it would appear...

Thank you, this is a massive help.

I've got an issue with my front wipers, I couldn't find the exact answer from other posts. When I put the wipers on nothing happens, sometimes if I put them on max speed they will wipe but slowly. I've had the usual issues with seized linkage before so today I removed the linkage to check and it...

Unfortunately they are the early 197, cheers

Cheers, very hepful, I will give those settings ago as I'm at Snetterton next week.

Evening, Sorry to jump on your thread but have similar questions re setup, I am running gaz golds, does anybody who's run these know do they have castor adjustment? and also if anybody can tell me how many clicks they have them set on that would be great. Cheers Matt

Cheers, I will double check

Cheers for the replies, definitely the right side and when I lay the new one next to the old one they appear to be close as the same length. Any tips for getting these fitted

Hi Has anybody had issues with fitting pagid handbrake cables from eurocarports. Went to fit one today and couldn't get both ends connected, 7nless I'm missing something it appears to be too short. Any advice appreciated Cheers Matt

do happen know the rest of the ferodo number the F139..

I thinking having the same experience with these pads as you, my mate runs the sames pads and discs on hos 197 and swears by them. My meachnic suggested could be becasue they wearn't bedded in properly (pads were on the car when I bought it), looking at the bedding in instructions on the Ferodo...

Cheers, very helpful, so did you also get judder with the DS3000's aswell as the DS1.11?

Hi all After some advice opinions on brakes, my rears need new pads and discs. I know the general consensus seems to be use standard Renault pads and discs ( I understand the rears don't do much work!), just wondered if anybody had any experience with Godspeed discs...

Cheers, do you have a Mocal one that has a connection for a oil temp sensor as well as the cooler?. could you send us a link