Matt's GW 200
- Thread starter decon
- Start date
hi 
i like your car can you tell me the feelings about the ride now when its on HR´s ? is it more stiffer and bouncy or ? and what they are ? 30mm ?
i like your car can you tell me the feelings about the ride now when its on HR´s ? is it more stiffer and bouncy or ? and what they are ? 30mm ?
At the same time I ordered some red Lamin-x off rbrocky, for my fog lamps to add a bit more colour to the front end. Heres how it all turned out
Before:
After:
And how it all looks
And one last photo of how she looks at the minute
oo i do like how that front end turned out! Never had anyone use red on the fogs, very modern very different!
Glad your pleased with it.
If anyone else wants any in any colour hit me up
or check out the facebook page.
Thanks for all the comments guys
Yer I did consider that about the red fogs. But as it's not a legal requirement for cars to have fog lights fitted, I can get away with it as long as I dont use the lights on the road.
And yer the petrol cap is a bit marmite, some days I like it and other I don't.
Yer I did consider that about the red fogs. But as it's not a legal requirement for cars to have fog lights fitted, I can get away with it as long as I dont use the lights on the road.
And yer the petrol cap is a bit marmite, some days I like it and other I don't.
Long time coming update
Have made quite a few changes over the last couple of months and thought it was about to time for an update
I finally bit the bullet and got my hands on a K-Tec cat back system (the noise is just incredible!)
I made the decision to do a full audio upgrade which consisted of JL components in the front & JL coaxiles in the back, all running off a inphase amp I had. And whist the interior was in pieces I also decided to add a parrot system along with a bit of white vinyl wrapping to help set off the interior.
I will be re wrapping this bit as its a bit rough around the edges :bored:
A little before & after of the door handles
I decided to fit the parrot system under the centre console to keep it tucked away (sorry for the bad pics of this), and the control was fitted on the left of the steering column.
Then onto a slightly more challenging mod....... Bonnet aero catches (I'm guessing this isn't going to appeal to all, but I love it). I managed to source a bonnet from a local breaker and got straight to work. It was a bit of a pain due to the positioning of the catches and how they were going to sit, but I got there in the end.
Im taking it to Spray Shack this saturday for a full respray, and cannot wait to get it back and fitted!
And one last final touch that finally arrive in the post today courtesy of streamline carbon.
Ill be sure to get some pics up once the bonnet is finished and everything is fitted.
Thanks for reading, comments and opinions welcome
Have made quite a few changes over the last couple of months and thought it was about to time for an update
I finally bit the bullet and got my hands on a K-Tec cat back system (the noise is just incredible!)
I made the decision to do a full audio upgrade which consisted of JL components in the front & JL coaxiles in the back, all running off a inphase amp I had. And whist the interior was in pieces I also decided to add a parrot system along with a bit of white vinyl wrapping to help set off the interior.
I will be re wrapping this bit as its a bit rough around the edges :bored:
A little before & after of the door handles
I decided to fit the parrot system under the centre console to keep it tucked away (sorry for the bad pics of this), and the control was fitted on the left of the steering column.
Then onto a slightly more challenging mod....... Bonnet aero catches (I'm guessing this isn't going to appeal to all, but I love it). I managed to source a bonnet from a local breaker and got straight to work. It was a bit of a pain due to the positioning of the catches and how they were going to sit, but I got there in the end.
Im taking it to Spray Shack this saturday for a full respray, and cannot wait to get it back and fitted!
And one last final touch that finally arrive in the post today courtesy of streamline carbon.
Ill be sure to get some pics up once the bonnet is finished and everything is fitted.
Thanks for reading, comments and opinions welcome
Thanks guys, glad theres a few others that like it
As much as I fancy a set of ITB's these are just cosmetic.
As much as I fancy a set of ITB's these are just cosmetic.
A bit of carbon dressing + aero catches
The day finally came on Saturday to collect the new bonnet from Si at SprayShack and get it fitted along with a few bits of carbon from Chris at Streamline
Cant thank the guys enough, great to work with and excellent quality as always!
Gear Insert with white detail
Bullets with white detail
Front & Rear diamonds
And then the new aero catch bonnet. Cant be happier with how this turned out, really gives the front end that race look
Cheers for looking, and look forward to your guys comments.
The day finally came on Saturday to collect the new bonnet from Si at SprayShack and get it fitted along with a few bits of carbon from Chris at Streamline
Cant thank the guys enough, great to work with and excellent quality as always!
Gear Insert with white detail
Bullets with white detail
Front & Rear diamonds
And then the new aero catch bonnet. Cant be happier with how this turned out, really gives the front end that race look
Cheers for looking, and look forward to your guys comments.
Looking good pal just need to see you come alomg to one of the meets now to show it off :thumbup:
Similar Thread Suggestions
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
Matt's 200 | Projects/Progress Threads | 138 | |
|
Matt's track/nurburgring RS250 Clio f1 | Projects/Progress Threads | 351 | |
|
Matt's Glacier White Megane 265 - 4th time lucky! | Projects/Progress Threads | 154 | |
|
Matt's CUP | Projects/Progress Threads | 32 | |
| M | Matt's Blue 197 + Previous motors | Gallery | 18 |