Latest activity
-
Stay away from yellowstuff. If you can go for the DS1.11, great bite from cold -
The DS2500s were okay, they were even used for a few track days. I don’t really have anything to compare them to as we just put better...
-
FfunMACHINE posted the thread Difference of these ?? 543025293R / 8200926467 (front Cup dampers) in Clio 200 Area.Hey there , does anybody know whats the difference between these dampers ? Dialogys says the 8200926467 is for the early 200 with big...
-
We drove the car over to AW Motorworks today to get the Clio aligned so it would drive straight at Snetterton on 28th September after... -
burrellbloke reacted to KoZa's post in the thread Clio 3 RS F1 Team R27 Meglio - it will be a trackcar with
Like.
Fitted :) -
j!mbob replied to the thread Torque setting for ring gear to diff?.Can't remember where I got it from, but this is what I used and my friend and both get hammered on track -
-
I have the PMS mounts set at maximum castor +7.3 degrees with camber -2.4 maximum camber without cutting the strut towers. The extra...
-
I didn’t notice much of a noise change on the V6 box, but possibly because the exhaust was so noisy. Car looks unreal. -
Final bits today. All the trims put in and lower trims cut for the cage, could do with a bit more fettling but it is good as it is...
-
Onrus replied to the thread Glacier White 200 Cup.I have the PMS mounts set at maximum castor +7.3 degrees with camber -2.4 maximum camber without cutting the strut towers. The extra...
-
We drove the car over to AW Motorworks today to get the Clio aligned so it would drive straight at Snetterton on 28th September after...
-
Final bits today. All the trims put in and lower trims cut for the cage, could do with a bit more fettling but it is good as it is... -
Sean197 reacted to KoZa's post in the thread Clio 3 RS F1 Team R27 Meglio - it will be a trackcar with Like.
Fitted :) -
Tturkie172 replied to the thread Dead 197 - Electrical Issue….CONNECTOR NO (BLACK) Small Clio 2008 without Xenon Lights
-
