Wotbox clio 197

[Jp Murphy]

Hi there can anyone please help me what color is the wires of the Throttle Position Sensor and the Cam Position Sensor for a renault clio 3rs 197 F4r engine and what does each wire do or work for on the Throttle Position Sensor and the Cam Position Sensor? Thanks in advance

 

[turkie172]

What problem are you having? Renault use a wiring system called VISU for all wiring grouped by model like the 197 Clio is a Mk3 so known as X85

 

[Jp Murphy]

Hi turkie172 i am struggling because i am putting in a wotbox and i have to know what each wire does on the Throttle Position Sensor and the Cam Position Sensor and i have to know what color each wire is and what it does

 

[turkie172]

OK I'm familiar with launch control and quick shifters but on Superbikes, Intercept all your wires at the ECU and feed the box inside the car as it will be a better environment for the box and easier to program with the laptop. The inputs all go to the ECU so it will be neater and easier at that point so what you need is ECU pinouts and wire colours that's should be OK. We need to know the year of the car but it should all be the same and if the car is a cup / keyless full car and options like Xenon headlights, RHD or LHD that sort of thing. Why not sign up it costs £5 a year or there is other one off options and we can put this in the "How To " section which is only for paid members and we can do a write up with some pictures. Where abouts are you based I have a feeling from the name your in the Emerald Isle.

 

[turkie172]

I haven't heard anything from you do you still need the wiring

 

[Jp Murphy]

Hi there yes i do my car is clio rs 3 197 2007 model it doesn't have the Xenon Headlights and also it is not keyless start

 

[turkie172]

Right this should keep you busy the diagram shows component numbers and locations next three are the connector plugs for injection computer with pinouts. Then the injector wiring diagram which ties everything together "BG" "VA" etc. are the French abbreviations for wire colour and you will see circuit codes along with component numbers then the last two are connector diagrams with pinouts for throttle body (1076) and TDC sensor (149) I don't think you need the Cam position sensor (1265) because you need to control the throttle to hold RMP but will need the clutch signal for quickshifter which you did not mention (675) on the main diagram and the pinout last diagram. Good luck and let us know how you get on so we can get an ending to this thread.







3

 

[turkie172]

If you never did French like me