Agricultural show this weekend and been asked to take the car along. Think it might look out of place alongside all the classic tractors.
Trackspec Clio 197
- Thread starter trackspec197
- Start date
tombate911
Paid Member
Looks great with those white wheels. Can't beat a proper track car being towed around on a trailer!
Thanks Tom. Much prefer the white wheels on it than the black ones.
TB Rich
Paid Member
Just a question. How are the ball joints uprated . I’ve had a genuine one go after 6 trackdays. Thinking the same as you too much kerb hopping. Would be interested in a uprated pair. Cheers
I bought the “uprated” joint off Didier on this forum. He would be the best to tell you how they’re uprated. 6 track days is shocking to destroy a new one but mine definitely failed due to kerbs.
Time for a caliper rebuild. Such an easy job to do and saves a fortune.
The heat had perished the seals quite badly with multiple holes on 4-5 of the pistons with the rest looking quite split. The nipples were easy to remove thankfully because I’d bled brakes not too long ago.
Current progress:
Seals all removed and ready for a clean and repaint.
The new seals arrive next week so I will clean down and repaint tomorrow and install the seals when they arrive.
The heat had perished the seals quite badly with multiple holes on 4-5 of the pistons with the rest looking quite split. The nipples were easy to remove thankfully because I’d bled brakes not too long ago.
Current progress:
Seals all removed and ready for a clean and repaint.
The new seals arrive next week so I will clean down and repaint tomorrow and install the seals when they arrive.
I’ve got high temp red brake paint I’ll be using. It was through a friend of mine. This whole job and paint will total £40.
Pav
Moderator
did this in my 2nd year of ownership..good maintenance is the key to a happy owner 
Was after a recommendation vs taking a chance and potentially getting a chinese copy bud without paying through the nose for a Renault kit if they do them
You can get the kits through Big Red, eBay etc and prices vary based on what you want but are no more expensive than around £40 a kit. The kits are generally Budwig (from Denmark) and use HEL parts both of which are very good quality. The original seals are made in Spain and can also be bought off eBay.
tombate911
Paid Member
Good job done that, messy and fiddly at times but nothing beats nice and fresh calipers.
Red caliper paint ordered, got me a nice wire wheel for the grinder and will set about painting them up once I have had the car cleaned and mopped then made v.shiny by my mate who just loves cleaning cars 
rear calipers and carriers are worse than the fronts, corrosion has got under the red and they have blistered, and I’m buggered if the fronts won’t match the rears cos I’m a bit anal like that, not fussed if it says Brembo on the side or not, those who know just know
rear calipers and carriers are worse than the fronts, corrosion has got under the red and they have blistered, and I’m buggered if the fronts won’t match the rears cos I’m a bit anal like that, not fussed if it says Brembo on the side or not, those who know just know 
Mark_L
Platinum Member
Look really good Matt, nice and Bright,
Saw you this morning just before Black Bridge.
