Stud conversion

[lewishunter98]

Just received my stud/nut conversion through the post.

Got a question about Loctite. What 'grade' Loctite shall i buy for the studs? I have tried looking about but seen mixed answers, some saying something like 270/2 or 242 etc etc. No idea which is best haha!

If it helps, i doubt i'll have to take them out at any point?

Tia

 

[Micah]

@Big Ben

 

[Big Ben]

Just received my stud/nut conversion through the post.

Got a question about Loctite. What 'grade' Loctite shall i buy for the studs? I have tried looking about but seen mixed answers, some saying something like 270/2 or 242 etc etc. No idea which is best haha!

If it helps, i doubt i'll have to take them out at any point?

Tia

268 “fix and forget”

 

[lewishunter98]

268 “fix and forget”

Hahaha [emoji23] My mate has some 2700 he said I can have, high strength stuff apparently so I'm hoping that'll do the job!

Sent from my ONEPLUS A5010 using Tapatalk

 

[-Eddie-]

I used 2700.

 

[lewishunter98]

I used 2700.

Perfect then! If i ever have to pull them out i'll just struggle. Rather that than them fall out haha!

 

[-Eddie-]

Perfect then! If i ever have to pull them out i'll just struggle. Rather that than them fall out haha!

I think the only way you’ll get them out again is with plenty of heat lol.

 

[peter]

272

 

[lewishunter98]

Cheers lads!

I think the only way you’ll get them out again is with plenty of heat lol.

I'll worry about that when the time comes

 

[Mfmman]

Whereabouts did you get your studs from, just thinking about this for mine.

 

[APM]

Here is our Fitting Guide for our Race kits. Use a Red Loctite as indicated in the link.

https://www.apmotorsport.co.uk/race-stud-conversion-guide