KTR Pro Proformance with decat

[gazb197]

Having sold my miltek for one of these the flat spot is awfull! i was there on the miltek but on the KTR its awfull! it judders like crasy when driving slowly until the revs pass 3000rpm. If i change at 3000 in every gear the cars just a juddering mess until i reach 3500rpm in 6th.

Any ideas how to cure this? will a remap sort it?

 

[Ed...]

Yeah a proper remap will sort it mate. Sometimes it corrects itself via the lambda thgh

 

[gazb197]

It seems to have done the opposite! It wasn't so bad for the 1st week

 

[Ed...]

Ahhh well i wud suggest a disconnect battery for 15 minutes jobby n see if it will do it wen u re connect. Oh make sure u ha e radio code too

 

[gazb197]

Cool, i'l give that a try tomorrow night

 

[Foxspeed]

strange because mines fine hmy:

 

[Ed...]

Thats what i thght foxy try a soft reset and see if it rectified it

 

[Foxspeed]

Thats what i thght foxy try a soft reset and see if it rectified it

well it will set all the ecu sensors and learn parameters to zero and will need a good drive for it to force the ecu to run through all the tests

mines not really got a "flat spot" - its more of a torque jump at 2500rpm - it just pulls better from those revs

 

[Russell]

quick question.. since putting my piper on its got the worst flatspot ever! really bad! if i do this soft reset will i lose my map?

 

[foley]

quick question.. since putting my piper on its got the worst flatspot ever! really bad! if i do this soft reset will i lose my map?

No your map will not get erased,

 

[Ed...]

No ure map wont be erased only way to erase a map is flashing with new software

 

[simoxmino]

i had the same problem after i had remove the prekat with the Ypipe..
nobody reselved my problem.... i don't know why...