Hello all!

[Ollie white]

Fingers crossed that sorts it [emoji1305]

Welcome along mate!

Me too thanks mate

 

[Ollie white]

Does anyone know of reasonable priced cup spoilers?

 

[Beany]

Does anyone know of reasonable priced cup spoilers?

Reasonable doesn’t really happen much with cup spoilers... like gold dust unless you can get one luckily cheap

 

[Ollie white]

Reasonable doesn’t really happen much with cup spoilers... like gold dust unless you can get one luckily cheap

Ah it does seem like that I'm local to ktec so looks like il have to bite the bullet!

 

[Benno]

@tombate911 has a copy one off eBay (I believe) and that looks smart! I'm being patient, I'll get one eventually but bottom of the pile!

 

[Chris]

Welcome aboard!

 

[tombate911]

@tombate911 has a copy one off eBay (I believe) and that looks smart! I'm being patient, I'll get one eventually but bottom of the pile!

Yeah i've got an Italian copy. It took a lot of prep work to get it to paint as they must use something in the mould when making them which reacts with the paint. few coats of paint and flatting back and it's ok now.

 

[Ollie white]

So just fitted the map sensor, it defiantly felt better, only slight flat spot at 2500 idle sounded better went around a rounderbout and it was awful! But I had traction on turned it off and seems better now!?

 

[M19TNR]

Have you checked if it is decatted or not yet?
Also, is it a resonated or non-resonated system?

If these haven’t been mapped in (even though I know you’ve been told they have) that could be causing your flat spot.

(I’m sure some 197/200 people will be along to tell me I’m wrong, but I’m sure I can recall that from my 197 days years ago [emoji23])

 

[Ollie white]

Have you checked if it is decatted or not yet?
Also, is it a resonated or non-resonated system?

If these haven’t been mapped in (even though I know you’ve been told they have) that could be causing your flat spot.

(I’m sure some 197/200 people will be along to tell me I’m wrong, but I’m sure I can recall that from my 197 days years ago [emoji23])

It's still got the cat just been over to ktec and they sold me a second hand miltek decat pipe! So il fit this and see what happens, while I was there I needed up buying a cup spoiler! Haha

 

[Benno]

It's still got the cat just been over to ktec and they sold me a second hand miltek decat pipe! So il fit this and see what happens, while I was there I needed up buying a cup spoiler! Haha

Chances are it might well make your flat spot worse. I’d try and find out what’s causing it before fitting more stuff.

@M19TNR is bang on. My induction kit was fitted before I had it all mapped and it was horrific.

 

[Ollie white]

Chances are it might well make your flat spot worse. I’d try and find out what’s causing it before fitting more stuff.

@M19TNR is bang on. My induction kit was fitted before I had it all mapped and it was horrific.

It was really to see if it made it any better as there is paper work to say it's mapped with a cat, that's the only reason

 

[Ollie white]

Chances are it might well make your flat spot worse. I’d try and find out what’s causing it before fitting more stuff.

@M19TNR is bang on. My induction kit was fitted before I had it all mapped and it was horrific.

Here is a pic under my car to me it looks like it has a decat!?

 

[LOCKE]

Welcome in mate.

 

[Ollie white]

Welcome in mate.

Thanks mate! By your picture I guess you like bikes?? I have a Big Bang R1

 

[R11HOY]

Hi enjoy the car and site...hopefully you get the car sorted soon