engine revs holding

k2100

k2100

My revs seem to be very slow at falling, (just in neutral and revving it) is this normal? If so I'm after a lightened flywheel lol

Can anyone link me to a video of a 197 being revved?

Thanks in advance

Kieren
 
Inlet manifold (Or other) air leak would be my first guess....

Hanging idle is often a symptom of this.

And no - it's not normal.
 
I would say MAF sensor, played about with mine and the slightest movement gets the engine juddering and revving different...
 
You must log in or register to reply here.

Similar Thread Suggestions

Thread starter Similar threads Forum Replies Date
Brunoandrade98 Engine options for a Clio 197 Clio General Chat 6
Blindbandit No compression on 225 engine cylinder 1 Engine, Gearbox, Exhaust and Air Intake 5
N Car cut out after flash of esp light now doesnt even crank. Engine fan comes on with ignition and it comes up with low battery warning. Clio 197 Area 4
Mmmini RS200 engine lights coming on, advice needed Clio 200 Area 4
J waving revs on cold engine Engine, Gearbox, Exhaust and Air Intake 0
Similar threads
Engine options for a Clio 197
No compression on 225 engine cylinder 1
Car cut out after flash of esp light now doesnt even crank. Engine fan comes on with ignition and it comes up with low battery warning.
RS200 engine lights coming on, advice needed
waving revs on cold engine
Top Bottom