Hello, at the moment I stripping cables for a tracktool build. In the fusebox infront the battery there are 2 relays for the headlight washers. Can I remove them without getting any issues? The problem is I build a custom fusebox and dont know if the canbus need them. I cant connect clip or the battery to test it. The cup dont have the washers anyway. This is the last step before I recolating the battery in the back and this one is the last step. Silly question but I got issues in the past after disconnecting the pump from the rearwiper and the passenger window switch.
Clio 200 cup headlightwasher relay remove
- Thread starter alpi42
- Start date
Chambers_rs
Platinum Member
Jack Maxwell
Paid Member
Ive 95% certain that they can be removed. I've got all the factory wiring diagrams that show they are for headlight washers. I also followed the wiring and it goes to a connector that is not used on the side of the headlight washer bottle. I've been told that renault used the same wiring loom for multiple cars and just used the connectors needed for each model. I found this out after I had already sorted my wiring so didnt remove them and make my own fuse box.
