Bonnet lifters
- Thread starter Azagedon
- Start date
Fernandez
Gold Member
I'm trying some atm, still unsure if I like the look or not I just pressed 2 m6 nuts into an m10 nut and then drilled the threads out of the m6 nuts with a 6mm drill made four of these and fitted longer bolts, bonnet locks down and releases perfect, it's only a small lift though so it looks quite subtle
After taking a photo with the bonnet open on my 200, I've decided I'm going to put a black vinyl strip along the top of the bonnet where the gap is. Makes it look a little more aggressive View attachment 10132
I'm going to put a washer at each side of each nut that will give it 13mm lift at the rear if I like it I'm going to make my own spacers from round aluminium bar and get some high tensile bolts to keep it rigid and secure
Similar Thread Suggestions
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
Rattley bonnet. | Body Work and Exterior Lights | 5 | |
| D | Bonnet won't open | Body Work and Exterior Lights | 2 | |
| S | Bonnet switch question | Clio 200 Area | 1 | |
| H | Bonnet won't open, latch catch nothing | Clio 197 Area | 9 | |
|
Weight of stock hood, or bonnet, as you call it : ) | Clio 197 Area | 4 |