Search results

Nice one, did you buy it from the guy from Croatia (Goran)?

press the clutch, if the noise should dissappeare, then ur slave cylinder is probably on the way out.

The clio always works on idle a bit odd, it doesn't sound like an usual petrol car, that has to be pointed out. If you are having misfires, it usually indicates that the ignition coils are bad. A set of those (4pcs) are very cheap, 40quid (BERU are OEM ones). As a preliminary step, you can...

if the clutch is causing the noise, then it can be only the clutch bearing. when everything is cold (engine and box), turn on the engine, open the door of the passenger side and stay there. someone should then press the clutch, there should be noticeable change in noise if it's the bearing. if...

These are 197s, but it can help you with your decisions.

blue smoke usually means that you have a mixture of engine oil and fuel in some of the cilinders. Further on, that means that one or more cylinders are having issues with the piston rings, releasing too much oil. A compression test will tell you if the piston rings are ok or not ok. What you...

@Jay_197RS the same seller has multiple items, take a look at his store and you can find exact like the ones you want

If you have the standard exhaust, then this will fit right on, I bought these and I am waiting for the delivery. These are similair to the Scorpion tips, but not that angled. Also, ypu have to know that morw than 60mm in diameter could ruin your diffusor. These tips are ok because they arw quite...

You ball joints have quite a bit of play, so you need to replacement. Mostly, the ball joints on the control arms or the lower ones on the perfo hub. @Raptor6767 can provide you some heavy duty ones

this type squak?

damn, the last pic is soo good, some lovely car you got!

Hi, as I bought a Scorpion backbox for a 200, I will fit it on my 197. In order to do that, I also need some exhaust tips/trims. Here comes someone from you in handy, I would appreciate if a scorpion owner could measure those two dimensions on the given picture! thanks!

Both measurement were done at the same dyno? If not, you cannot compare those. Even to skip that, your m8s graph is to generous IMHO, when talking about whp, those are some crazy figures at the flywheel.

Thank you very much! This could be a pinned thread as the forum mate did it very nice.

Hi mates, I would appreciate if someone has a oem exhaust backbox lying around and is willing to do the measurements given on the picture below. I know it's a relatively fast job to remove the diffusor and to measure it out, but I don't have the space or place to do it, and a parking lot isn't...

The rubber could be ok, but when the engine moves/leans on one side, it lets the pressure of the mount and the metal part start moving and starts producing noise. If the car is steady, you cannot move it by hand. The clutch bearing/slave cylinder could cause also at all time some type of noise...

Just for an update, this was solved by replacing the upper engine mount. It was pretty much garbage.

Does it sound similair to this? https://clio197.net/threads/noise-rattle-after-gearbox-replacement.61046/ Did you maybe noticed that wheen you are driving and steering to one side, the sound gets worse or dissapears? I have had that problem and the upper engine mount was broken literally. The...

I know it's not "just do it", but to try to insert the old fuse box and check if the steering wheels unlocks? If the car then can be started, then the box you have somewhere it has a fault. If you do not manage to start the car, then it's not the box. @turkie172 knows has a wide knowledge with...

do you have some balance weights on the focus wheel ?