Search results

fter the missing compression on the third cylinder but then no longer out of my head, I have two replacement engines attached and one of them built last week. The engine is an 832. I have the toothed belt, WApu, spark plugs and the piston bearings and the thermostat exchanged. Otherwise, I have...

hey! The Wavetrack is not bad. However, it should work much better on small curves tracks like Zandvoort than on the nordschleife. In order for the lock to work properly you have to give more or less always full throttle which is not so good on the nordschleife as the range is very narrow. Im...

I wonder if you sell your Clio engine? Regards Thomas

No, I have no interest at all, as opposed to here in Germany is not so common. KW Clubsport :) Sure, I do not know since I have no memories of the accident, the SD card was apparently stolen by someone from the camera. The accident happened after a long closing and I was one of the first on...

Hello Peter, it is a torsional differential of wavetrack from USA. 2 years ago there was a collect order in the german cliors.de forum. but I would like to exchange this this winter against a Drexler diff

And in the end I finally managed it 7:59 BTG! Currently I am looking for a replacement engine and a replacement gearbox, if someone has something he can PM me pls! I hope the contributions and pictures you liked!

had again installed a KAt. the car is a lot more leezer as I find however still loud. Also, I could test the days at a cloudbreak times the fan, it has just been enough! : T: Short update! The days I had times again problems with the start of the Clios. Time he jumped very badly and...

afterwards I first build the R3 Replica manifold: love: The bend is in there. from the outside, the elbow has a high processing quality. However, the pipes that lead into the last collector after trimming have not even been deburred. The I then laboriously lengthened with an extension for the...

The Clio is now almost ready. Basically, was not much invested over the winter if one times the Macrolonscheiben. All in all (with passenger seat) I now quite exactly 50kg downpaced and 250 hours of work invested. much weight is no longer to fetch. Of course, you can still buy a lot of GFK then...

Have today the dashboard brought to Saarbrücken train. So it looked before, in a week I get it again. I cut the sides of the page. Despite the "light construction" it is still to be quite clean. On the board itself I have saved 1kg PE (ventilation nozzles etc. not included). Today I...

so went on. I have now the dashboard wiring harness by about 2.5kg facilitated and everything continues to work up to the ZV of the driver's door. Well, one should think is not so bad I close with the emergency key. Thats not OK. Since that lock apparently no electricity gets I iorgendwo made a...

The breakthroughs in the front wall, I first closed with aluminum plates. For the new ventilation, I'll probably use the breakthrough top right under the disc. it went to the bitumen mats in the car. A friend had once seen somewhere that the dinger can easily solve with dry ice. In Bonn there...

For the coming season, I've got a trailer! For the winter, I had planned to save a little superfluous weight. So I thrown out the dashboard and removed the heater box. With the cooling water hose from the Cupclio it works quite well. The heating box weighs only 7kg, of course, the control...

long nothing more. I had used the last two weeks of vacation and the time productive. I once polished the work ethic and the Clio once. Washing, washing, baking, washing, polishing, polishing, fine polishing, sealing. All in all was and I am very satisfied with the result, however, I exaggerated...

here again a few pictures in the employment. the front part of the track was slightly broadened, the diffuser was hung higher, and cut-outs were cut for the rear wheel house. Is currently badly in the trend. Oh yes, the roadrunner is alsoh again in the car: D AR1 are ready. Furthermore...

so es ging weiter. Ich stand vor der Frage wie ich den Polstecker am besten und am platzsparensten verstauene kann. Damals hatte ich dafür einfach einen großen Schaltkasten genommen, jetzt sollte er kleiner sein und vorallem flacher. Da ich nirgends etwas in 9x9x3cm gefunden habe kam ich auf...

Today again the brake ventilation somewhat improved. Are the first prototypes and actually developed for the Mini, but also fit the Clio quite well. Could go soon for a couple around the 30 € in series, if interest exists. In the pictures one sees the Feiderbein naturally relieved. For this, of...

In the interior, it ran parallel to it. The steering wheel was replaced, the moldings changed, other shells installed and the door panels were installed. On the muttering came so much to the day: D The black has unfortunately a very high equipment level, which is why you had to worry about some...

Hey my name is thomas from germany. Perhaps someone knows my white clio which I crashed 2015 at nordschleife exit fuchsröhre :smiley: Now a pair of pictures of the white ph2. here you can see the cracked seat rail. In this episode, I have also suffered the head injuries, despite Helm...

At the end of the season the engine broke... Now im intaling a new one and a KW Clubsport. here is a video from a round in 2014 https://www.youtube.com/watch?v=od9LWmZqcag&list=UU3poC-UwrSWU3eRBigXQhvw