Search results

these aren't, my white ones are (see page 1).

I've been collating these whilst working on my track project. Will continue to add anything I find in the service manual which may be of interest: Upper Engine Mounts: Lower Engine Mount (Dogbone) Wheel Hub Area / Wishbones etc:

Just a quick comparison before / after the ASTs were fitted. Not properly set the ride height yet, but this is probably halfway down the full thread. The wheels look lost, considering some spacers. I used to run 15mm hubcentric spacers on the 172, so thinking something similar for the 197...

Thanks Yiannis197 - all sorted:

Thanks mate. 450/450. Keeping it fairly tame for now, may upgrade the springs next year once the car is bedded in and I've got more confident in it on track.

No probs. I'll drop them tomorrow and move the bolts. Amy other top tips? also, do you know what the marks on the top relate to? Obviously Degrees of camber, but what's the scale? Not had the alignment or geo done yet.

Yiannis197 boom. Thanks mate, I'll have a look tomorrow. I didn't know there was different mounting points for the adjuster... And I must confess the fitter.....was me :-)

Np - check out eBay item 191735922498

Hey Pav, they're from eBay, there's a polish renaultsport dealer on there selling bits and bobs. Search Clio 197 caliper and he'll pop up somewhere. I paid something like 130euro each. Nice guy though and did a deal on 2 calipers and a new front ally rad. I think he does red or silver (2...

Lastly starting to collect bits for a brake overhaul. MTEC hook pattern brakes front and rear: New calipers as the old ones are SHOT! Also ordered the following bits and pieces, will update once delivered: Ferodo DS1.11 front pads Ferodo DS2500 rear pads Goodridge Braided Lines ATE...

Also been powerflexing it up.... Upper engine mount, torque arm and lower engine mount done so far.

Top Mounts in situ - not too happy with the way these sit, seems to be very difficult to access the adjustment bolts... have to think on this. Anybody with any experience of ASTs care to comment?

So the car came back from the workshop last week, cage was fitted but they made a right mess of the interior paint! note to self... wait until the cage is in before painting!!! New gearbox is also in with the quaife and now the car drives a lot better - the old one was whining a lot which i...

Update 16-06-16 So the car was dropped off at the garage to get the gearbox fitted last Friday, and the cage fitted at the same time. Due back tomorrow so will post some pictures once its back! In the meantime, here is one of her waiting patiently for some surgery.... :-) Today some more...

No problem. Remember to make sure you install it on a 32 bit laptop.

I thought about it, but then decided against it as I don't have a method of neatly cutting them out, and for the weight saved vs work done I don't think it's worth it? May do in the future. ps I regularly go to both Thetford and Dereham, that's quite local to you so could tie up and sort your...

Roll cage getting delivered on Friday :bounce:

As promised - we weighed items as they came out of the car. As follows: Misc Plastic 6.6kg Carpet & Mats 7.6kg Seatbelts & Intertia Reels 6.6kg Roofliner 1.4kg Side Curtain Airbags 2.0kg ISOfix Bar 2.4kg Foam & Sound Proofing 7.8kg Misc Tar 4.3kg Toolkit 0.5kg Parcel Shelf...

Thats a bit far mate... :-) I'm in Sussex! Once you have CLIP installed, plug it into the ODB port, and scan the computers. The airbags should all be in there "fault" condition before you do this (no resistors connected etc), and you should see under the status section what is wrong. You...

Hey Paul, Thanks for the heads up, makes perfect sense :-)