Search results

It‘s working fine! Thanks for the information here.

OK, thank you! Then the plug in the yellow circle must be the right one. It has 10 pins and in row 1 are three pins free. 86M green is #1 86G orange is #2

Can someone confirm that this is the right plug (1519) to connect the cruise control? green and orange cable should be 86M and 86G?

TRW PJQ192

I have done more or less the same roadtrip mid of june - would have been a big surprise to meet so much Renault Sport People on Gaviapass or Stelvio!

Try this one: http://www.clio197.net/threads/trw-slave-cylinder-robust-design.55603/#post-626795

The left one is to inspect the clutch disc trough the pressure plate (hope that's the right word for the part with the spring) and the right one is to inspect the slave cylinder.

I drilled a 5 mm hole into the bell housing.

I 'm using the LUK and can't recommend it because it's also a plastic housing and by inspecting it with a endoskop I saw that the rubber boot is in bad condition after 10.000 km of usage.

There is a slave cylinder from TRW (part#: PJQ192) with alloy housing what should be more robust than the original Valeo plastic part.

http://www.touristenfahrerforum.de/forum/showthread.php?t=108570&highlight=cup+flanke

Yes it is a known issue! In the german Toristenfahrerforum some guys reported about the same failure on different cars.

I think Michelin know's the failure mode that happened to Peter's Michelin and therefore they recommend these high pressure values to reduce the load from the tyre's shoulder. The crack of the humb is often seen with cup's on the ring.

It's a full fat with CUP Pack, Colour Pack, Recaro seats, Keyless, Akrapovic EVO, Front brake w. Brembo HC / Ferodo DS1.11, Rear brake w. Ferodo DS Performance pads, KW Clubsport, Cup 7.5x17 w. Federal RS-R 215/45 17, LiFePo4 battery 1.4 Kg, Wavetrac LSD, Wiechers rollbar, Powerflex bushings for...

If you want to go to the ring I would recommend Federal RS-R if the weather is not to hot. I compared it to AD08R / Hankook RS3 / Bridgestone RE070 / Kumho KU36 and the fastest Lap was with the Federals. or If you want to go to a semi - some friends tried the Nankang AR-1 on the ring but...

I'm running a 1,3 Kg LiFePo4 battery and it's working fine: http://shop.i-tecc.de/lifepo4-starterbatterie-lifeenergy10000-12v-10ah-balancer-inside.html (sorry for the link to a german page) This battery has A123 Cells which are also used in the liteblox batterys.

More sticky rubber and some testing with decoupled ARB to fix understeer

I can't find this wheels. Is it possible that they are not longer produced by OZ?

I learned that it has to be 130 Nm

I'm fitting a Wavetrac LSD. Can someone give me the torque value for mounting the final drive ringear to the LSD.