Search results

Model Y?

Exactly, plus the fuses are readily available unlike the OE option

Personally I’d bin all that off for a Mega/Midi fuse setup using crimped ring terminals. Link

There are 2 aluminium machined spacers and longer bolts to mount it to the chassis legs (where the rad mount is). The rears bolt up to the subframe. There are also 2 x M8 threaded inserts in the crash bar for rods if required.

You’ll still need the anti submarine airbag coding out via CLIP or you could use a resistor on the loom - seat side.

If you can retrofit the Clio seat loom into the VXR seat then that would be your easiest option. You may need to de-pin the airbag connectors or cut and crimp the wires. You can then either fit a resistor to the missing anti submarine airbag plug on the seat loom or code it out with CLIP.

Yes, genuine tools to do the change properly.

I can rent you a set. Based in Solihull so I’d likely have to post them

As above, both M6

The one I posted was for an oil cooler too. They do one purely for sensors - Link Apologies if you’ve already ordered, I thought you had a cooler but reading back it was just suggested you might get one :grimacing:

Are you able to check the battery voltage with the engine running and with it not running? Did you use a genuine alternator as some aftermarket ones can produce the error you speak of?

Check the bonnet switch, the bracket may have corroded

From memory @R20BTG had issues teeing off the existing sensor

Link

Yes

They are definitely unique and I love the car! The supreme kit is a bit of a bargain when you consider my IC/rad setup was nearly 2k. You could easily fit it yourself, have it mapped and enjoy it as it is. I kind of went mad with the ECU, fuel setup etc. You won’t get 400bhp though without...

How deep are your pockets and how much are you prepared to lose? I have 370 in mine and it’s plenty. I have tussles with all sorts of high powered cars on track but it’s come at a cost. Not worth my sort of outlay IMHO, buy a Megane or something like an M2.

@Raptor6767 Rene had loads of trouble with Catcams and timing