Search results

Clear. Concise. To the point. 10/10 would read again.

I said this but Gav has other ideas! He wants to stick with the 200 front end. Personally think the 197 is a better looking car but what do I know? :wink:

Such a shame the day ended like it did for you but you both walked away from it, which is ultimately the main thing! The impact doesn't look as bad as I was expecting, I think you've been really lucky with the damage after a quick look over while I had the front end in the air on my trailer...

Might be worth getting yourself an M14x1.5 tap to clean the threads out fully, I did mine with multiple passes of brake cleaner and working a tap in and out to fully clean the threads, then a final bit of brake cleaner, dry with an airline if you can and then Loctite the studs in. I left mine...

No that is correct. I did mine to 25Nm with some Loctite 270 (I think that's the right Loctite anyway) and they've been fine. I just take them out every year and reapply the Loctite.

@Steve.humberstone The short version is that the AR1 is a quicker tyre once it's in the perfect operating window, but you'll only have a couple laps of that then it'll drop off. The MRF is slightly slower BUT more consistent, I found that on a clear track my times with the MRF (hard compound -...

4-5 hard laps of Snetterton is more than enough at times!

PBS ProRace I would get 4-5 on average, so far my EBC RPX have done 5 I think and probably have another couple in them. But you're right, it'll vary hugely across different users, tracks etc...

I'd suggest changing the handbrake cables while you're refreshing the rear brakes. Mine was a combination of the calipers being knackered and the cables being partially seized up.

Oh yeah. Those. :sweatsmile:

First pic are Autec Wizards, second pic are Sparco Assetto Corsa

Yeah just punted a couple more holes in the floor. I can't remember if I did both sides or just the drivers side, can't say I'm too concerned about the passenger though :tearsofjoy:

I have TRS Magnums in mine and were originally 4 point. The buckle has the hole to add the extra strap so you can crush your nads in style, mine are now a 6 point with the addition of the £30 strap or whatever it cost me.

I can get behind that. Get yours ready for March and come do this event with me.

I originally wasn't going to post anything about this car until I'd been through it and tidied it up, but it needs a lot more work than expected. 1998 Peugeot 306 XSI, 135bhp, just over 1000kg and set up for Targa rally, nav rally etc... Story behind this one is that I owned this actual car...

Check it over but I wouldn't bother changing it.

Is that a harmonica in your exhaust or are you just happy to see me?

17x7.5 ET45 is the way to go.

I had running issues with my 06 197 recently, struggling to idle, running on 2 cylinders and being hesitant on throttle. I put a new front/upstream lambda in and it's cured it. Bosch part number 0258006046, £42 from Autodoc if you're not in a rush. (Check the plug is correct though as there are...

Raining all day, didn't fancy getting wet to block out the lack of sunshine :tearsofjoy: