Search results

Decent Setup :hearteyes:. Mind if you can share some info about the ignition coils you are having there.

If you would to take the supercharger route, I recommend engine health check prior to that especially if it has a high mileage. I strongly recommend to consider lower cambelt protection cover (Pure Motorsports) in case crank pulley fails, it won't get stuck in the cambelt and jump the cam...

Drive Belt (aka Aux. Belt) status can be visually inspected (good, dry, etc) via it's portion that goes over the alternator's pulley. Cam Belt is covered with a shield and open when it's change is due (~60-80,000 km)

I'm from United Arab Emirates and my sources for Genuine Renault Parts are: 1. https://eurofrance24.com/ 2. https://www.autodoc.co.uk/ 3. https://www.renaultgenuineparts.com/ The first two websites are the fastest upon part's availability. for your future considerations.

How do you see the car drivability with this setup at the moment? with respect to the rear shims, what's your target rear toe/camber? I'm running with -2.5 front, -2.0 rear, 0 toe for both.

Since it's a track toy, I would recommend silicon hoses (e.g. forge) with new clamps for peace of mind.

There you go.

Glad to hear BC Racing are working on their kit for C3RS :)

Yes it dose. Mine is fitted along with the GT spolier in.

The question is if you want to have extra power, then sport cat is the max you need to consider & silencer to reduce the exhaust sound (plus inside noise level!). If your place are so restricted, then just drop in a base map and you should still be able to enjoy the squeezed extra hp over stock.

The ideal combination I believe will be Sport Cat (200 cells) + mid section silencer + the rest of your preference performance exhaust system for your case

https://www.wheel-size.com/size/renault/clio/2011/#trim-20i-rs-eudm-198 For the general information

Yes.

19mm spacer if you would to consider 25mm bolts size as I recall

You need a Megane to begin with

Time to get boosted :grin:

This is how it looks like. You can display parameters that can be read from ECU.

Yes. for more information https://www.scangauge.com/products/scangauge-ii/

Have you consider Scan Gauge?