Recent content by wootwoot

Hi yes the noise stopped. I replaced the PVC and used some clamps on the hose as it was ok, but not great

Hey guys I found the part number for the PCV, but was there one for the hose that connects to it to the top of the engine? Or did people just use generic hose from an auto shop? My car makes that weird duck noise at idle and was told it was usually the PCV, and the hose is pretty hard and...

Any tips I should know to change over the hoses or bleed the system?

Any recommendations for the clamp type I should look at?

Booooooo... I had a feeling it was the whole thing. I presume there is no aftermarket option also due to the weird design. Anyone know anywhere to get it reasonably priced?

Hey guys Can anyone explain the outlet of the radiator hose and the plastic connectors? My hose is swelling..... And was looking at replacing it but cannot figure out if it's the whole thing,as the diagram also does not make it clear. I believe it is number 2 for the whole thing??

No joke, my check emissions light just came on. Hahahah

Regarding your check emissions light. I have it come up a few times to haunt me. It comes on when doing fwy speeds and triggers after three faults but has to be in a row I find. If the sensors are ok, it could be an exhaust leak before the sensor or an air leak from the intake somewhere, or...

Thanks for the info Had any breakages?

Hey I wanted an honest opinion on the Silver's project camber tops. I drive on bumper roads with Bilstein b14s and find I keep breaking the tops once a year. Anyone used the Silver's?

Gee the autec wheels look great. Really makes me want a set

If you go with the B14s make sure you trim the rear bump stop about 1.5cm The car will sit almost on the rear bump stop at max rise hight on the adjuster.

I was also looking at the silver camber tops but got told that they are not strong and they personally had seen quite a few that were bent from use. Just keep you eyes on them.

Hey guys does anyone have a picture of the connector of the h7 bulb to the main driving light in a 197 reflector housing? Just trying to figure out if a particular LED bulb will fit it.

Clean the pcv valve, throttle body and map sensor, then secure the map sensor down. Also get a throttle controller from EVC. It makes it feel like it has a tune under 4k. I am in Victoria also