Recent content by WheelerDave

My son’s car has an oil leak coming from the joint in the gearbox casing. So it needs taking apart and a new gasket, or something like that. The oil leak is quite bad. The box had new syncros done about 6 years ago, so it all works fine. So ideally he doesn’t want to pay for a new box. Can...

It’s a 2009 Clio RS 200 Cup. They are the standard OEM brackets I think/ hope? I’ve ordered the ones off eBay above so will see if they do the trick It is a non standard exhaust, single exit, but I think attached to the standard hangers. Will let you know how I get on…..

I see. It’s the bit in the smaller circle I’m after

Thanks. Thats the middle bracket and rubber hangers for the rear. What I need are the metal brackets those rubber hangers fix onto on car. The brackets are bolted to the boot floor of the car

Thanks but I don’t think these are the right part. Here is a photo of what we need

Uk

Thanks, but this link does not work?

Does anyone know where we can get new rear exhaust hanger brackets - the ones that fix to the boot floor and then hold the exhaust rubber? Renault don’t make them anymore. The part numbers are 8200486488 8200486487 Thanks for any help with this

Thanks, appreciate it

Excellent! Thanks for your help with this one :)

The throttle cable broke on our cup car today at a track day - the white plastic part that joins the top of the accelerator pedal broke. It does not appear to be the same arrangement as on a Mk3 RS 200 (I had a look at my son's road car) as that has an electronic accelerator pedal set up...

AIM dash worked a treat. Super post sale support from AIM so I would 100% recommend. I also managed to buy the correct plug for it so it was a simple plug and play solution.

I just wanted to share this in case it’s of use to someone else in the future. We had to replace the horn on my son’s RS200. Once we found it it was relatively straightforward. It is located behind the bumper, in the middle at the top, in front of the radiators. To get to it you can take the...

Thanks mate, I appreciate the response......and sort of as expected, but you never know..... We might take the car to the badge place for them to take what they need off them in situ Hopefully we will have a stock of them soon for everyone who needs them :)

We are looking to have some new silver metal badges made for my son's RS 200 b pillars (It's an RS200 Cup model). However, we need one to use as a sample to have copied. Does anyone have one going spare please? We can buy it, or borrow it (for a fee of course :) ) just so the badge company can...