Sean197's latest activity
-
Now for the winter In 2 minds what to do I have a set of Sabelt buckets to go in and would fit a cage at the same etc However I am... -
Finally got round to getting a geo setup done Taken the 20mm spacers off and fitted a set of 8j Speedlines Must admit it's like a new...
-
@Chambers_rs drop me a message on here or on Instagram @duct3d if you need any help with your battery kit.
-
Final bits today. All the trims put in and lower trims cut for the cage, could do with a bit more fettling but it is good as it is...
-
Sean197 replied to the thread Clio 197 front spring dimensions.You don't need dimensions, all you need to know is if your car is a cup version or non-cup. Always change springs in pairs too. Try Ebay...
-
The tyres are on ready for a wet day at Donington Park. Four brand new tyres and fitting costing a little bit less than my usual...
-
I found a good way to refill the gearbox oil is gravity feed trough the reverse/neutral switch with the car on the ground,leave the...
-
Sean197 replied to the thread Fitting a turbo engine - Clio 197.It'll be as reliable as the map. If the map is shite then it doesn't matter how 'built' the engine is. You have a turbo manifold...
-
Sean197 replied to the thread Fitting a turbo engine - Clio 197.Turbo from a megane 250/265 will run 310bhp, using a megane 225 ecu with a map is the cheapest option.
-
Had a few small fixes to do and did a rough geometry with 80kg of postcrete courtesy of Screwfix as it's the cheapest 20kg you can buy...
-
Removed a lot the tired stuff.
-
Big delivery from PureMotorsport First 2 boxes and we have bucket seat mounts and drivers foot plate. Got the foot plate in...
-
That Cup racer dash with the stock clocks looks great
-
Hi all, I’m new to the MK3 chassis since breaking my supercharged K20 MK2. My first car was as a MK1 Clio which is where the love for...
-
We are now in August, brought the engine home and started cleaning, probably spent a week cleaning everything, the inside was just caked...
