RSRowe's latest activity
-
RSRowe replied to the thread Track Rods or Steering Rack?.No I mean the swivel joints (there is an upper and lower). The lower beginning to fail is generally per the noise you described. Bush... -
Only way to tell for sure it's to take both the inner and outer track rods out and inspect the joints and the rack itself. I haven't...
-
RSRowe replied to the thread Track Rods or Steering Rack?.There's no real way to tell, other than fitting the new parts and listening out for the noise again. Rack problems are fairly rare, but...
-
RSRowe replied to the thread Random stutter/misfire.Fair enough. It's just very odd to see all cylinders consistently low. But the results are the results. I'd still get them verified...
-
I measured on mine and it was around 165 psi but with throttle body open so possibly 120 about right but haven't tried with closed throttle.
-
RSRowe replied to the thread Random stutter/misfire.That still doesn't feel low to me, but the wet test will back up your suspicions.
-
RSRowe replied to the thread Difference of these ?? 543025293R / 8200926467 (front Cup dampers).Depends on how you want to use the car. For strictly road, if you have lowering springs, I would steer away from them and use the...
-
RSRowe replied to the thread Difference of these ?? 543025293R / 8200926467 (front Cup dampers).It's possible that there is some internal differences, but I can't see that being the case personally. As you've seen, both are 200 cup...
-
RSRowe replied to the thread Silverstone Edition 200 - AST 5100.I didn’t notice much of a noise change on the V6 box, but possibly because the exhaust was so noisy. Car looks unreal.
-
Final bits today. All the trims put in and lower trims cut for the cage, could do with a bit more fettling but it is good as it is...
-
First wash since last year. Gave the full works, claybar, polish and wax
-
if its keyless did you follow the "forced ignition on" procedure....if not then obd2 will not work
-
RSRowe replied to the thread R20 BTG - 200 Cup Track Car Blog.don't forget to cancel your forum membership :poke:
-
So as per the for sale thread, this was sold and collected last night. You'll probably still be seeing the car on the track day circuit...
-
RSRowe replied to the thread OEM vs YellowStuff pads.Yellowstuff are very poor, not what I'd recommend. A complete waste of money. A Mintex M1144 or M1155 would be way more suitable for...
